3M 08116 Panel Bonding Adhesive, 200 mL Dual Cartridge Epoxy, 24 hr Curing
- The 3M 08116 Panel Bonding Adhesive is a two-part epoxy adhesive (base and accelerator) in a 200 mL dual-cartridge, designed for bonding and sealing non-structural outer body panels such as door skins, roof skins, quarter panels, box sides, van sides, using steel, aluminum, SMC or FRP materials.
- Features:
- Contains glass beads to control bond line thickness for consistent application and to prevent excessive squeeze-out
- Long work life — approximately 90-120 minutes working time before beginning of significant cure
- Corrosion-inhibiting formula helps protect joints from environmental damage
- Can be heat cured on demand for faster throughput, or cured at room temperature for convenience
- Specifications:
- Part No.: 8116
- Product Line: MMM
- MFR Model: 8116
- Standard/Approvals: California PROP65 Warning: Cancer and Reproductive Harm | OSHA 29 CFR 1910.1200
- Applications: For door hem flanges, door skins, floor pans, metal bonding and metal to composite bonding
- Manufacturer: 3M Products
- Alternate Part Number-1: 60980109015
- UPC: 051135081167
- Brand: 3M
- Applicable Materials: Steel, Aluminum, SMC/Fiberglass
- Application Time: 90 to 120 min
- Specific Gravity: 1.2
- Color: Black
- Container Size (mL): 200
- Setting Time: 6 hr
- Flash Point: >300 deg F
- Container Type: Cartridge
- Form: Viscous Liquid
- Temperature Rating (deg F): 70
- Type: 2-Part
- Curing Time: 24 hr
- Part Number 08116, 3M ID 7000045775, UPC 051135081167
- The 3M 08116 Panel Bonding Adhesive may also be referred to as Panel Bonding Epoxy 08116, 3M body panel adhesive dual cartridge, non-structural panel bonding adhesive, 200 mL 2-part epoxy adhesive, and 3M outer body panel adhesive 08116.
3M 08116 Panel Bonding Adhesive is built for modern collision repair and body work, offering reliable bonding and sealing of outer body panels with excellent durability and corrosion protection. Its dual cartridge delivery with glass beads ensures consistent bond lines, whether cured at room temperature or heat accelerated.
Q: Can this adhesive be used for structural components like frame rails?
A: No. 08116 is intended for non-structural outer body panels. Structural components such as frame rails, pillars, or rocker panels should follow OEM specifications, usually requiring welding or structural adhesives approved for those tasks.
Q: How long do I have to work with the adhesive after dispensing?
A: You typically have about 90-120 minutes at 73°F before it begins curing significantly. Working time decreases in higher temperatures.
Q: What surface preparation is required for optimal bonding?
A: Surfaces must be clean, dry, free of paint, rust, and primer on the mating flanges. Use proper cleaning agents and abrasive tools to remove contaminants. Dry-fit and clamp panels as recommended, and follow OEM or 3M repair guidelines.
