Air Filtration PA152020-50 Fiberglass Paint Arrestor Pads, 20 x 20 x 2 Inch, 15 Gram, 50 per Case

Air Filtration PA152020-50 Fiberglass Paint Arrestor Pads, 20 x 20 x 2 Inch, 15 Gram, 50 per Case

• Air Filtration PA152020-50 Fiberglass Paint Arrestor Pads are 15 gram, green, water resistant fiberglass exhaust filters for spray booths. Each 20 x 20 x 2 inch pad delivers proven overspray capture and paint holding capacity for longer service intervals, and the 50 per case bulk pack supports cost-effective maintenance across busy finishing operations.
• Features:
  • 15 gram fiberglass media provides efficient overspray capture to help maintain booth cleanliness and airflow
  • Green, water resistant construction supports durability with solventborne and waterborne coatings
  • Proven performance: tested average 98.81 percent removal efficiency with 2.22 pounds paint holding capacity (per 20 x 20 inch pad)
  • Pre-cut 20 x 20 x 2 inch pads install quickly in standard exhaust frames to reduce downtime
  • Compliant for use in qualifying operations under EPA 6H guidelines when properly installed and maintained
• Specifications:
  • Manufacturer: Air Filtration
  • Part Number: PA152020-50
  • SKU: AFPA152020-50
  • Size: 20 x 20 x 2 inches
  • Media: Fiberglass, 15 gram, green, water resistant
  • Average Removal Efficiency: 98.81 percent (per 20 x 20 inch pad)
  • Average Paint Holding Capacity: 2.22 pounds (per 20 x 20 inch pad)
  • Packaging: 50 pads per case
  • System Compatibility / Application: Spray booth exhaust filtration; suitable for solventborne and waterborne coatings; EPA 6H compliant when properly used
• The Fiberglass Paint Arrestor Pads can also be referred to as paint booth exhaust filter pads, 15 gram fiberglass pads, 20 x 20 x 2 booth filters, GA10 paint arrestor, and PA152020-50 filter pads.

Air Filtration manufactures spray booth filtration media and accessories for industrial finishing, offering economical fiberglass arrestors and higher efficiency options to help facilities meet quality targets and regulatory requirements.

Q: Are these pads compatible with both solventborne and waterborne coatings?
A: Yes. The green, water resistant fiberglass media is designed for spray booth exhaust and performs with both coating types when installed and maintained correctly.

Q: How often should I replace the pads?
A: Replace when booth static pressure reaches the changeout point specified by your booth manufacturer or when airflow declines; many shops use the manometer reading to set consistent intervals.

Q: What performance can I expect from the 15 gram pads?
A: Tested averages indicate 98.81 percent removal efficiency and 2.22 pounds of paint holding capacity per 20 x 20 inch pad, supporting clean finishes and longer service life.