Axis APR12311-1 Epox-Prime & Seal Epoxy Primer Sealer, Gray, 4:1 Mix, 1 Gallon

Axis APR12311-1 Epox-Prime & Seal Epoxy Primer Sealer, Gray, 4:1 Mix, 1 Gallon

• A two-component epoxy primer and sealer for automotive refinishing, with adhesion to properly prepared bare metals, OEM surfaces, factory e-coats, and body filler. The formulation provides corrosion protection and can be sanded when required before topcoating.
• Features:
  • Suitable for properly prepared cold rolled steel, stainless steel, galvanized steel, aluminum, OEM surfaces, factory e-coats, and body filler.
  • Mixes 4 parts primer to 1 part Epox-Prime & Seal Activator.
  • Can be reduced 5% to 10% when required for application conditions.
  • Pot life is up to 8 hours at 72 F and 50% relative humidity.
  • Applies in 1 to 2 wet coats with 10 to 15 minutes flash time between coats.
• Specifications:
  • Manufacturer: Axis
  • Part Number: APR12311-1
  • Product Type: Two-Component Epoxy Primer and Sealer
  • Color: Gray
  • Capacity: 1 Gallon
  • Mix Ratio: 4:1
  • Activator: BPR12301-4 or BPR12301-6
  • Dry Film Thickness: 1.0 to 1.2 mils per coat
  • HVLP Gun Setup: 1.4 mm to 1.6 mm
  • HVLP Air Pressure: 8 to 10 psi at air cap
  • Conventional Air Pressure: 40 to 45 psi
• The Epox-Prime & Seal Epoxy Primer Sealer can also be referred to as automotive epoxy primer, gray epoxy sealer, corrosion resistant primer, bare metal epoxy primer, and two-component primer sealer.

Axis produces professional refinish products for automotive, marine, fleet, and aviation applications. Its coating systems include primers, sealers, clearcoats, reducers, solvents, and related refinishing materials.

Q: Which activator is used with APR12311-1?
A: Use Epox-Prime & Seal Activator BPR12301-4 or BPR12301-6 at a 4:1 primer-to-activator ratio.

Q: How long should the primer flash between coats?
A: Allow 10 to 15 minutes between wet coats and 30 to 60 minutes before applying topcoat.

Q: Can APR12311-1 be sanded?
A: Yes. It can be sanded with 180 to 220 grit or finish sanded with 400 to 600 grit.