Axis VCG Velocity Clear Low VOC Air-Dry Clearcoat, 4:1 Mix, 1 Gallon

Axis VCG Velocity Clear Low VOC Air-Dry Clearcoat, 4:1 Mix, 1 Gallon

• Fast-drying automotive refinish clearcoat formulated for air-dry application without baking. Wet-on-wet application requires no flash time between coats and is suitable over proper basecoats and prepared OEM or 2K finishes.
• Features:
  • Apply two full wet coats with no flash time required between coats.
  • May be reduced up to 5% with AXI-DTMHPR Reducer Series.
  • Recommended dry film thickness is 1.8 to 2.2 mils.
  • Out of dust in 10 minutes and ready for nib sanding and buffing in 30 minutes at 77F under stated conditions.
• Specifications:
  • Manufacturer: Axis
  • Part Number: VCG
  • Product Type: Automotive clearcoat
  • Size: 1 Gallon
  • Mix Ratio: 4:1
  • Compatible Hardener: AXI-VCH Velocity Clear Hardener
  • Regulatory VOC As Applied: 2.1 lb/gal maximum
  • Recommended Dry Film Thickness: 1.8 to 2.2 mils
• The Velocity Clear can also be referred to as automotive clearcoat, air-dry clearcoat, low VOC clearcoat, wet-on-wet clearcoat, and 4:1 automotive clear.

Axis supplies professional refinish products for automotive, marine, fleet, and aviation markets. Its range includes coatings, primers, clearcoats, reducers, solvents, and related refinishing materials.

Q: Which hardener is used with VCG Velocity Clear?
A: Mix VCG with AXI-VCH Velocity Clear Hardener.

Q: Can VCG Velocity Clear be reduced?
A: Yes. It may be reduced up to 5% with AXI-DTMHPR Reducer Series.

Q: What spray gun setup is recommended for VCG?
A: Use a 1.3 mm to 1.4 mm fluid tip. Conventional gravity feed pressure is 25 to 27 psi, while HVLP or LVLP pressure is 30 psi.