5 Star Xtreme 5400-01 Hi-Solids Acrylic Lacquer Primer Surfacer, Gray, 4.58 VOC, 1 Gallon

5 Star Xtreme 5400-01 Hi-Solids Acrylic Lacquer Primer Surfacer, Gray, 4.58 VOC, 1 Gallon

• Fast-drying, high-build acrylic lacquer primer surfacer for automotive refinishing and surface preparation. It sands to a fine featheredge and is suitable for properly prepared metal, fiberglass, body filler, and previously finished automotive surfaces.
• Features:
  • Mixes 1 part primer surfacer with 1 part 5910 Acetone or low VOC high grade lacquer thinner by volume.
  • Apply 2 to 3 medium coats with 10 minutes flash time between coats.
  • Can be sanded after 30 minutes under specified application conditions.
  • Suitable substrates include treated steel, fiberglass, cured body filler, treated aluminum, OEM enamels, OEM lacquers, refinish lacquers, refinish enamels, and metal etches.
• Specifications:
  • Manufacturer: 5 Star Xtreme
  • Part Number: 5400-01
  • Product Type: Acrylic lacquer primer surfacer
  • Color: Gray
  • Size: 1 Gallon
  • VOC: 4.58 lb/gal
  • Mix Ratio: 1:1
  • Coats: 2 to 3 medium coats
  • Flash Time: 10 minutes between coats
  • Sand Time: 30 minutes
  • Final Sanding for Sealer: P400
  • Final Sanding for Topcoat: P600
• The 5400-01 Hi-Solids Acrylic Lacquer Primer Surfacer can also be referred to as gray lacquer primer surfacer, automotive acrylic primer, high solids primer surfacer, automotive sanding primer, and gray automotive primer.

5 Star Xtreme is an automotive refinishing brand manufactured by Autobody Brands International, a division of International Autobody Marketing Group. The brand supplies primers, clearcoats, hardeners, solvents, body fillers, masking materials, and related automotive body repair products.

Q: What should 5400-01 be mixed with?
A: Mix 1 part primer with 1 part 5910 Acetone or low VOC high grade lacquer thinner by volume.

Q: What substrates can 5400-01 be applied over?
A: Suitable substrates include treated steel, fiberglass, cured body filler, treated aluminum, OEM enamels, OEM lacquers, refinish lacquers, refinish enamels, and metal etches.

Q: How many coats should be applied?
A: Apply 2 to 3 medium coats with 10 minutes flash time between coats.

Q: When can 5400-01 be sanded?
A: It can be sanded after 30 minutes under specified application conditions.