5 Star Xtreme 5400-04 Hi-Solids Acrylic Lacquer Primer Surfacer, Gray, 4.58 VOC, 1 Quart

5 Star Xtreme 5400-04 Hi-Solids Acrylic Lacquer Primer Surfacer, Gray, 4.58 VOC, 1 Quart

• Single-component automotive primer surfacer for filling and preparing properly prepared repair areas before sealing or topcoating. The acrylic lacquer formula offers high build, fast drying, easy sanding to a fine featheredge, color holdout, minimal shrinkage, and adhesion to approved substrates.
• Features:
  • Mixes 1:1 by volume with 5910 Acetone or low VOC high grade lacquer thinner.
  • Apply 2 to 3 medium coats with 10 minutes flash time between coats.
  • May be sanded after 30 minutes under normal application conditions.
  • Suitable substrates include treated steel, fiberglass, cured body filler, treated aluminum, OEM enamels, OEM lacquers, refinish lacquers, refinish enamels, and metal etches.
• Specifications:
  • Manufacturer: 5 Star Xtreme
  • Part Number: 5400-04
  • Product Type: Acrylic lacquer primer surfacer
  • Color: Gray
  • Size: 1 Quart
  • VOC: 4.58 lb/gal
  • Mix Ratio: 1:1
  • Coats: 2 to 3 medium coats
  • Flash Time: 10 minutes between coats
  • Sand Time: 30 minutes
  • Final Sanding for Sealer: P400
  • Final Sanding for Topcoat: P600
• The 5400-04 Hi-Solids Acrylic Lacquer Primer Surfacer can also be referred to as gray lacquer primer surfacer, automotive acrylic primer, high build lacquer primer, automotive sanding primer, and gray primer surfacer.

5 Star Xtreme is an automotive refinishing brand from Autobody Brands International, a division of International Autobody Marketing Group. Its product range covers primers, clearcoats, hardeners, reducers, masking materials, and other professional automotive refinish supplies.

Q: What should 5400-04 be mixed with?
A: Mix 1 part primer surfacer with 1 part 5910 Acetone or low VOC high grade lacquer thinner by volume.

Q: What spray pressure is specified for 5400-04?
A: Spray at 8 to 9 psi at the cap for HVLP or 40 to 45 psi with a conventional spray gun.

Q: What sanding grits are specified after the primer dries?
A: Use P400 before sealing or P600 before topcoating, or equivalent.