Gearwrench 85065M Micrometer Torque Wrench, 3/4" Drive, 100 to 600 ft lb

Gearwrench 85065M Micrometer Torque Wrench, 3/4" Drive, 100 to 600 ft lb

• Gearwrench 85065M micrometer torque wrench applies controlled torque from 100 to 600 ft lb for heavy duty fasteners. It uses a 3/4" drive with a 36 tooth ratcheting head and a twist locking collar for secure, repeatable settings. This is a general service tool, not a replacement part for a specific SKU.
• Features:
  • 36 tooth ratchet with 10 degree swing arc improves access on large equipment for faster fastener turns
  • Torque accuracy plus/minus 3 percent clockwise from 20 to 100 percent of range supports consistent clamp load
  • Twist locking collar holds the set torque to prevent accidental changes during use
  • High visibility scale with 2.5 ft lb primary increments enables precise, repeatable adjustment
  • Application specific note: general torque tool for industrial and fleet service; not designed as a replacement part for a specific SKU or model
• Includes:
  • Micrometer torque wrench (85065M)
  • Blow mold storage case
• Specifications:
  • Manufacturer: Gearwrench
  • Part Number: 85065M
  • Drive / Connection Type: 3/4" square drive, ratcheting, 36 tooth
  • Torque Range: 100 to 600 ft lb
  • Accuracy: plus/minus 3 percent clockwise from 20 to 100 percent of full range
  • Primary Scale Increments: 2.5 ft lb; alternate scale increments 3.4 Nm
  • Swing Arc: 10 degree
  • Overall Length: 42.4 inches
  • Head width: 2.6 inches; head length 1.97 inches; head thickness 1.14 inch; head thickness less tang 0.37 inch
  • Material / Finish: alloy steel, full polish chrome; pliable elastomer handle
  • Standards: ASME B107.300; meets or exceeds ISO 6789
  • Packaging Type: boxed; includes blow mold case
  • System Compatibility / Application: high torque fastening on heavy vehicles, construction, and agricultural equipment; not a replacement for a specific SKU
  • Alternate Part Number: 85065M (commonly shown by distributors)
• The micrometer torque wrench can also be referred to as 3/4 inch drive torque wrench, click micrometer torque wrench, industrial torque wrench 100 to 600 ft lb, heavy duty torque wrench, and Gearwrench 85065M torque wrench.

Gearwrench designs professional torque tools for industrial, fleet, and automotive service, including micrometer click wrenches built to recognized ASME standards as part of Apex Tool Group's portfolio.

Q: What is the specified accuracy range?
A: The wrench is rated plus/minus 3 percent clockwise from 20 to 100 percent of capacity for consistent torque application.

Q: Does this model have a flex head?
A: No. The 85065 series is a fixed head micrometer torque wrench with a 36 tooth ratchet.

Q: What comes in the box?
A: The torque wrench and a blow mold storage case are included.