High Teck 77750-1 1K Black Sealer, NR/SC Compliant, 1 Gallon

High Teck 77750-1 1K Black Sealer, NR/SC Compliant, 1 Gallon

• High Teck 77750-1 is a low VOC 1K sealer for automotive and industrial refinish applications. It is pre-reduced and ready to spray for wet-on-wet sealer or primer surfacer use over properly prepared surfaces.
• Features:
  • Built-in corrosion resistance and adhesion for properly prepared hot roll steel, cold roll steel, and 2K painted surfaces.
  • Suggested for use over hot roll steel, cold roll steel, fiberglass, and sanded 2K coatings.
  • Pre-reduced ready-to-spray formula requires no mixing before application.
  • Application methods include HVLP gravity feed, pressure pot HVLP, air assist airless, conventional spray, airless spray, brush, or roller.
  • Apply 1 to 2 medium wet coats with 5 to 10 minutes flash time between coats.
• Specifications:
  • Manufacturer: High Teck
  • Part Number: 77750-1
  • Product Type: 1K sealer
  • Color: Black
  • Container Size: 1 gal
  • Compliance: NR/SC compliant
  • Mixing Status: Pre-reduced and ready to spray
  • Application: Wet-on-wet sealer or primer surfacer
  • Film Build: 50 to 75 microns, 2.0 to 3.0 mils
  • Quantity: 1
• The 1K Black Sealer can also be referred to as black primer sealer, ready-to-spray sealer, low VOC sealer, wet-on-wet sealer, and automotive primer surfacer.

High Teck supplies automotive refinish materials, coatings, primers, clears, activators, abrasives, and body shop supplies for collision repair and refinishing professionals.

Q: Does High Teck 77750-1 require mixing?
A: No. High Teck 77750-1 is pre-reduced and ready to spray.

Q: What surfaces can High Teck 77750-1 be applied over?
A: It is used over properly prepared hot roll steel, cold roll steel, fiberglass, and sanded 2K coatings.

Q: How many coats are applied?
A: Apply 1 to 2 medium wet coats with 5 to 10 minutes flash time between coats.