High Teck BL200 National Rule Truck Bed Liner Kit, Tintable, 2.93 lb/gal VOC, 5 Piece Kit

High Teck BL200 National Rule Truck Bed Liner Kit, Tintable, 2.93 lb/gal VOC, 5 Piece Kit

• High Teck BL200 is a tintable two-component urethane truck bed liner kit for automotive, agricultural, heavy machinery, commercial, industrial, and home coating applications. It produces a chemical resistant textured coating for truck beds and other durable-use surfaces.
• Features:
  • Textured coating has resistance to UV damage and abrasion.
  • Tintable clear base accepts 3 Ounce of basecoat or single stage tint in each Part A can before catalyst is added.
  • 3:1 mixing ratio uses Part A bed liner and Part B activator.
  • Practical coverage is 90 to 100 Square Feet per 4 Quart kit at 15 mil.
  • Application uses a Schutz type gun at 40 to 70 Pounds per Square Inch.
• Includes:
  • Part A 3/4 Quart Bed Liner, quantity 4
  • Part B 1 Quart Activator, quantity 1
• Specifications:
  • Manufacturer: High Teck
  • Part Number: BL200
  • UPC: 813834084401
  • Color: Tintable
  • VOC: 2.93 lb/gal
  • Mixing Ratio: 3:1
  • Tint Addition: 3 Ounce of basecoat or single stage tint per Part A can
  • Coverage: 90 to 100 Square Feet per 4 Quart kit at 15 mil
  • Pot Life: At least 50 minutes at 75 Degrees Fahrenheit
  • Ideal Application Conditions: 75 Degrees Fahrenheit with humidity less than 60 percent
  • Application Equipment: Schutz type gun at 40 to 70 Pounds per Square Inch
  • Flash Time: 30 to 60 minutes depending on temperature
  • Full Cure: 48 hours
  • Packaging Type: Kit
• The National Rule Truck Bed Liner Kit can also be referred to as High Teck BL200 bed liner kit, tintable truck bed liner kit, urethane bed liner kit, spray-on truck bed coating, and textured protective bed liner.

High Teck serves the Paint, Body and Equipment market through distributor partnerships and focuses on quality, affordability, and customer service.

Q: What components are included in the BL200 kit?
A: The kit includes four Part A 3/4 Quart bed liner containers and one Part B 1 Quart activator.

Q: How is tint added to BL200?
A: Add 3 Ounce of basecoat or single stage tint to each Part A can before adding catalyst, then shake until the color is uniform.

Q: How much area does one BL200 kit cover?
A: One kit covers a standard size truck bed at 15 mil, with practical coverage of 90 to 100 Square Feet per 4 Quart kit.