High Teck HFP150-1 Series HFP National Rule Urethane Basecoat, Frost White GM WA-8624, 1 Gallon, 6.8 lb/gal VOC

High Teck HFP150-1 Series HFP National Rule Urethane Basecoat, Frost White GM WA-8624, 1 Gallon, 6.8 lb/gal VOC

• High Teck HFP150-1 is an HFP-Series polyester basecoat for automotive refinish overalls, large blend-area repairs, and ground-coat work. The factory-pack Frost White color is blendable to match the GM WA-8624 OEM paint code and may be top coated with clearcoat.
• Features:
  • HFP-Series Urethane Basecoat is a quick-dry, good hiding factory-pack line for popular OEM colors.
  • May be mixed 1:1 by volume with urethane-grade universal reducer.
  • May be catalyzed up to 10 percent of the unreduced color portion with appropriate isocyanate hardener.
  • Apply 2 to 4 single coats, or until full coverage is achieved.
  • Clearcoat window is 20 minutes minimum and 24 hours maximum flash time at 70 Degrees Fahrenheit.
• Specifications:
  • Manufacturer: High Teck
  • Part Number: HFP150-1
  • Product Type: Series HFP National Rule Urethane Basecoat
  • Container Size: 1 Gallon
  • Color: Frost White
  • OEM Color Code: GM WA-8624
  • Composition: Polyester Basecoat
  • VOC: Maximum 6.8 lb/gal Ready to Spray
  • Mixing Ratio: 1:1 by Volume with Reducer
  • Reducer: Urethane-Grade Universal Reducer
  • Optional Hardener: Less Than 10 Percent of Unreduced Color Portion
  • Coats: 2 to 4 Single Coats
  • Flash Time Between Coats: 5 to 10 Minutes at 70 Degrees Fahrenheit
  • Clearcoat Window: 20 Minutes Minimum and 24 Hours Maximum at 70 Degrees Fahrenheit
  • Pot Life: Indefinite if Not Catalyzed
  • Viscosity at Gun: 13 to 15 Seconds Number 4 Zahn
  • Recommended Film Thickness: Approximately 0.4 to 0.8 Mil
  • Coverage: 286 Square Feet per Gallon at 0.6 Mil
  • Final Dry Sanding: P500 to P600 Grit
  • Final Wet Sanding: P800 to P1000 Grit
  • Spray Gun Setup: 1.3 to 1.5 Millimeter Gravity Feed or HVLP, 1.6 to 1.8 Millimeter Siphon Feed
  • Packaging Type: Gallon Container
• The Series HFP National Rule Urethane Basecoat can also be referred to as High Teck HFP150-1 basecoat, Frost White urethane basecoat, GM WA-8624 basecoat, National Rule automotive basecoat, and polyester refinish basecoat.

High Teck serves the Paint, Body and Equipment market through distributor partnerships and focuses on quality, affordability, and customer commitment across refinishing products, tools, and shop supplies.

Q: What OEM color code is linked to HFP150-1?
A: HFP150-1 Frost White is linked to GM WA-8624.

Q: How is HFP-Series basecoat mixed?
A: Mix 1 part HFP-Series basecoat with 1 part urethane-grade universal reducer by volume.

Q: When can clearcoat be applied?
A: Allow a minimum of 20 minutes and a maximum of 24 hours flash time at 70 Degrees Fahrenheit before clearcoat.