High Teck HFP150C-1 Series HFP Low VOC Urethane Basecoat, Frost White GM WA-8624, 1 Gallon, 6.8 lb/gal VOC

High Teck HFP150C-1 Series HFP Low VOC Urethane Basecoat, Frost White GM WA-8624, 1 Gallon, 6.8 lb/gal VOC

• High Teck HFP150C-1 is an HFP-VOC Series polyester basecoat for automotive refinish overalls, large blend-area repairs, and ground-coat work. The factory pack color is blendable to match the GM WA-8624 OEM paint code and may be top coated with clearcoat.
• Features:
  • HFP-VOC Series Polyester Basecoat is a quick dry, good hiding factory pack line of popular colors.
  • May be mixed 1:1 by volume with VOC-grade universal reducer.
  • May be catalyzed up to 10 percent of the unreduced color portion with appropriate isocyanate hardener.
  • Apply 2 to 4 single coats, or until full coverage is achieved.
  • Clearcoat window is 20 minutes minimum and 24 hours maximum flash time at 70 Fahrenheit.
• Specifications:
  • Manufacturer: High Teck
  • Part Number: HFP150C-1
  • Product Type: Series HFP Low VOC Urethane Basecoat
  • Container Size: 1 Gallon
  • Color: Frost White
  • OEM Color Code: GM WA-8624
  • Composition: Polyester Basecoat
  • VOC: 6.8 lb/gal
  • VOC at Gun: Maximum 3.5 lb/gal Ready to Spray
  • Mixing Ratio: 1:1 by Volume with Reducer
  • Reducer: VOC-Grade Universal Reducer
  • Optional Hardener: Less Than 10 Percent of Unreduced Color Portion
  • Coats: 2 to 4 Single Coats
  • Flash Time Between Coats: 5 to 10 Minutes at 70 Fahrenheit
  • Clearcoat Window: 20 Minutes Minimum and 24 Hours Maximum at 70 Fahrenheit
  • Pot Life: Indefinite if Not Catalyzed
  • Viscosity at Gun: 13 to 15 Seconds Number 4 Zahn
  • Recommended Film Thickness: Approximately 0.4 to 0.8 Mil
  • Coverage: 286 Square Feet per Gallon at 0.6 Mil
  • Final Dry Sanding: P500 to P600 Grit
  • Final Wet Sanding: P800 to P1000 Grit
  • Spray Gun Setup: 1.3 to 1.5 Millimeter Gravity Feed or HVLP, 1.6 to 1.8 Millimeter Siphon Feed
  • Packaging Type: Gallon Container
• The Series HFP Low VOC Urethane Basecoat can also be referred to as High Teck HFP150C-1 basecoat, Frost White urethane basecoat, GM WA-8624 basecoat, low VOC automotive basecoat, and 1 Gallon refinish basecoat.

High Teck serves the Paint, Body and Equipment market through distributor partnerships and focuses on quality, affordability, and customer commitment across refinishing products, tools, and shop supplies.

Q: What OEM color code is linked to HFP150C-1?
A: HFP150C-1 Frost White is linked to GM WA-8624.

Q: How is HFP-VOC Series basecoat mixed?
A: Mix 1 part HFP-VOC Series basecoat with 1 part VOC-grade universal reducer by volume.

Q: When can clearcoat be applied?
A: Allow a minimum of 20 minutes and a maximum of 24 hours flash time at 70 Fahrenheit before clearcoat.