House of Kolor KC10-G00 Wax and Grease Remover, Clear, 1 Gallon Can, 6.5 Pound per Gallon VOC

House of Kolor KC10-G00 Wax and Grease Remover, Clear, 1 Gallon Can, 6.5 Pound per Gallon VOC

• House of Kolor KC10-G00 is a surface prep cleaner for removing grease, wax, silicone, adhesives, tar, tree sap, insects, and dirt before sanding and bodywork. The quick-flashing formula is for initial cleaning over unsanded surfaces and OEM finishes in National Rule areas.
• Features:
  • Removes grease, wax, silicone, adhesives, tar, tree sap, insects, and dirt.
  • Quick-flashing formula for initial surface prep before sanding and bodywork.
  • Use over unsanded surfaces and OEM finishes.
  • Apply with a clean cloth and wipe dry with a clean, dry cloth before the product dries.
  • KC20 is the House of Kolor final wipe-down product.
• Specifications:
  • Manufacturer: House of Kolor
  • Part Number: KC10-G00
  • Product Type: Wax and grease remover surface cleaner
  • Cleaner Type: Degreaser
  • Color: Clear
  • Size: 1 Gallon
  • Container Type: Can
  • VOC: 6.5 Pound per Gallon maximum actual VOC
  • Regulatory VOC: 6.43 Pound per Gallon maximum
  • Density: 6 to 8 Pound per Gallon
  • Category: Surface cleaner
  • Use Area: National Rule areas only
  • Surface Use: Unsanded surfaces and OEM finishes
• The Wax and Grease Remover can also be referred to as House of Kolor wax and grease remover, KC10 surface prep cleaner, automotive wax remover, paint prep degreaser, and clear solvent cleaner.

House of Kolor is a custom automotive paint brand founded in 1956. The brand serves the custom paint community with refinish coatings, color systems, and specialty paint products for painters and builders.

Q: What contaminants does KC10-G00 remove?
A: It removes grease, wax, silicone, adhesives, tar, tree sap, insects, and dirt.

Q: When should KC10-G00 be applied?
A: Apply it during initial surface prep before sanding and bodywork, then wipe the surface dry with a clean cloth before the product dries.

Q: Is KC10-G00 used as the final wipe down before painting?
A: No. KC10 is not meant for final wipe down before painting; use KC20 for final wipe down.