Kirker Automotive Finishes UA51375-1 ULTRA-GLO Acrylic Urethane Topcoat, Sugar Plum Pearl Metallic, 3:1 Mixing Ratio, 0.75 Gallon Can

Kirker Automotive Finishes UA51375-1 ULTRA-GLO Acrylic Urethane Topcoat, Sugar Plum Pearl Metallic, 3:1 Mixing Ratio, 0.75 Gallon Can

• Kirker Automotive Finishes UA51375-1 ULTRA-GLO is a single-stage acrylic urethane topcoat for passenger vehicle refinish, restoration work, commercial vehicles, and fleet equipment. The coating is supplied as a factory-packaged Sugar Plum Pearl Metallic color.
• Features:
  • ULTRA-GLO acrylic urethane color system is available in stock pre-mixed, factory-packaged colors.
  • Mixes three parts urethane topcoat with one part required Kirker activator.
  • No reduction is necessary, but Kirker recommends no more than 10 percent reducer if reduction is used.
  • Can be used as a single-stage application or with urethane clearcoat.
  • Pearl and metallic colors may require a uniform undercoat color, sealer, or solid color ground coat to improve appearance and hiding efficiency.
• Specifications:
  • Manufacturer: Kirker Automotive Finishes
  • Part Number: UA51375-1
  • MPN: UA-51375
  • Product Type: Acrylic urethane topcoat
  • Product Line: ULTRA-GLO
  • Color: Sugar Plum Pearl Metallic
  • Coating Type: Single-stage acrylic urethane
  • Finish: High gloss
  • VOC: 2.8 lb/gal
  • Mixing Ratio: 3:1
  • Capacity: 0.75 Gallon
  • Package Measure: 96 Fluid Ounces
  • Container Type: Can
  • Quantity: 1 can
• The ULTRA-GLO Acrylic Urethane Topcoat can also be referred to as acrylic urethane paint, single-stage urethane paint, Sugar Plum Pearl Metallic topcoat, automotive refinish paint, and fleet equipment paint.

Kirker Automotive Finishes manufactures automotive paint, primer, clearcoat, and refinish materials from Newburgh, New York. The company has produced automotive refinish coatings since 1898.

Q: What activator ratio is used with this topcoat?
A: This topcoat mixes three parts urethane topcoat with one part required Kirker activator.

Q: Is reducer required with this topcoat?
A: No. Reduction is not necessary, but Kirker recommends no more than 10 percent reducer if reduction is used.

Q: What undercoat guidance applies to pearl or metallic ULTRA-GLO colors?
A: Pearl and metallic colors may require a uniform undercoat color, sealer, or solid color ground coat to improve appearance and hiding efficiency.