Kirker Automotive Finishes UA61215-1 UCB Series Acrylic Urethane Topcoat, Quicksilver Metallic, 3:1 Mixing Ratio, 0.75 Gallon Can

Kirker Automotive Finishes UA61215-1 UCB Series Acrylic Urethane Topcoat, Quicksilver Metallic, 3:1 Mixing Ratio, 0.75 Gallon Can

• Kirker Automotive Finishes UA61215-1 is a UCB Series acrylic urethane topcoat for automotive refinish work. This Quicksilver Metallic coating is part of Kirker's ULTRA-GLO urethane color system and is mixed with compatible ULTRA-GLO activators before application.
• Features:
  • UCB Series formula contains coarse metallic flakes.
  • Clearcoat is strongly recommended when using this color because of the coarse metal flakes.
  • Mixes three parts urethane topcoat with one part compatible ULTRA-GLO activator.
  • No reduction is necessary, but Kirker recommends no more than 10 percent reducer if reduction is used.
  • At 68 Fahrenheit, the coating should set to the touch within 20 minutes and dry within one hour.
• Specifications:
  • Manufacturer: Kirker Automotive Finishes
  • Part Number: UA61215-1
  • MPN: UA-61215
  • Product Type: Acrylic urethane topcoat
  • Product Line: UCB Series
  • Color: Quicksilver Metallic
  • Coating Type: Single-stage acrylic urethane paint
  • Mixing Ratio: 3:1
  • Capacity: 0.75 Gallon
  • Package Measure: 96 Fluid Ounces
  • Container Type: Can
  • Quantity: 1 can
• The UCB Series Acrylic Urethane Topcoat can also be referred to as acrylic urethane paint, single-stage urethane paint, Quicksilver Metallic topcoat, UCB Series automotive paint, and metallic automotive refinish paint.

Kirker Automotive Finishes manufactures automotive paint, primer, clearcoat, and refinish materials from Newburgh, New York. The company has produced automotive refinish coatings since 1898.

Q: Is clearcoat recommended for this color?
A: Yes. Clearcoat is strongly recommended because this color contains coarse metallic flakes.

Q: What activator ratio is used with this topcoat?
A: This topcoat mixes three parts urethane topcoat with one part compatible ULTRA-GLO activator.

Q: Is reducer required with this topcoat?
A: No. Reduction is not necessary, but Kirker recommends no more than 10 percent reducer if reduction is used.