OTC 1127 Bearing Splitter Attachment, 3/4" to 13-3/8" Spread

OTC 1127 Bearing Splitter Attachment, 3/4" to 13-3/8" Spread

• This OTC 1127 Bearing Splitter Attachment is a specialist puller accessory used to separate bearings, gears, pulleys or similar press-fit components; it has knife-like edges for tight clearances, two tapped holes for adapter legs, and a spread range from 3/4 inch up to 13-3/8 inch.
• Features:
  • Minimum spread 3/4 inch; maximum spread 13-3/8 inch covers a wide size range of components.
  • "Knife-like" edges on splitter surfaces helpful for securing behind the component even when clearance is limited.
  • Tapped holes thread size 1-14 allows puller legs to be mounted securely.
  • Distance between adjusting screws 10-1/4 inch helps maintain stable alignment and even force distribution.
• Specifications:
  • Manufacturer: OTC
  • Part Number: 1127
  • Type / Function: Bearing splitter attachment
  • Minimum Spread: 3/4 inch
  • Maximum Spread: 13-3/8 inch
  • Tapped Hole Thread Size: 1-14
  • Distance Between Adjusting Screws: 10-1/4 inch
  • Product Dimensions: 22.9 x 5.6 x 4.9 inch(overall size for packaging / body)
  • System Compatibility: Designed to be used with OTC puller models Nos. 1047, 1073, and 939; splits press-fitted parts by allowing puller legs or jaws to exert even force behind the component.
• The OTC 1127 can also be referred to as OTC splitter attachment 1127, OTC 3/4-13-3/8 inch bearing separator, OTC puller accessory splitter, OTC heavy-duty bearing splitter, OTC press-fit removal tool.

OTC is a leading hardware and automotive service equipment manufacturer that designs and builds high-quality tools for vehicle diagnostics, lifting, and repair. Known for its innovation and durability

Q: What is "spread" for the 1127 bearing splitter?
A: Spread refers to the maximum and minimum distance between the two splitter faces; for the 1127 that is from 3/4 inch minimum up to 13-3/8 inch maximum it determines which size of parts can be accommodated.

Q: What does the 1-14 tapped hole thread mean for this tool?
A: There are two holes in the splitter attachment threaded 1-14 which allow puller legs to be securely mounted; this enables a push-puller or standard puller to apply balanced force behind components.

Q: Which OTC puller models are compatible with the 1127 Bearing Splitter?
A: OTC puller models Nos. 1047, 1073, and 939 are verified to work with the 1127 splitter for splitting or removing bearings or other press-fit parts.