USC 32046 PRONTO Kombi Spot Putty, Ready-to-Use One-Component, Olive Drab, 5 Ounces Tube

USC 32046 PRONTO Kombi Spot Putty, Ready-to-Use One-Component, Olive Drab, 5 Ounces Tube

• USC 32046 PRONTO Kombi Spot Putty is a one-component, ready-to-use spot putty for last minute body repair. It is formulated for adhesion to properly prepared metal, aluminum, galvanized steel, primers, and existing finishes, and it dries fast to help you move from pinholes and surface flaws to primer sooner.
• Features:
  • One-component, ready-to-use formula helps simplify small repairs with no mixing ratio required.
  • Fast drying putty supports quick turnaround on last minute imperfections during body repair work.
  • Adheres to properly prepared metal, aluminum, galvanized and other zinc-coated steel, primers, and existing finishes to help reduce rework from poor bond.
  • Designed for pinholes, surface flaws, and scratch marks to help improve surface quality before priming.
  • Not a replacement part; intended for automotive refinishing and body repair surface correction.
• Specifications:
  • Manufacturer: USC (U.S. Chemical and Plastics)
  • Part Number: 32046
  • MPN: USC.32046
  • UPC: 037307320463
  • Product Name: PRONTO Kombi Spot Putty
  • Alternate Part Numbers / Cross References: US32046, USC-32046
  • Category: Finishing Glazes and Putties
  • Subcategory: Spot Putty
  • Product Type / Function: One-component spot putty
  • Size / Capacity: 5 ounces
  • Container Type: Tube
  • Color: Olive drab
  • Mix Ratio: Ready to use
  • Recommended Application: 1-3 thin coats with 15 minutes between coats at 72 F (22 C)
  • Dry Time: 20 minutes at 72 F (22 C)
  • Tack Free Time: 45-90 seconds (depending on thickness and temperature)
  • Solids: 75.3 percent
  • VOC (Packaged): 396 g per l
  • System Compatibility or Application: Designed for last minute repairs, minor imperfections, pinholes, surface flaws, and scratch marks in body repair work on properly prepared metal, aluminum, galvanized and other zinc-coated steel, primers, and existing finishes.
• The PRONTO Kombi Spot Putty can also be referred to as Kombi spot putty, one-component air dry putty, ready-to-use spot putty, pinhole repair putty, and olive drab spot putty.

USC (U.S. Chemical and Plastics) manufactures collision repair and refinishing consumables, including body fillers, putties, fiberglass repair products, truck bed liners, masking products, abrasives, and refinish surface preparation materials used in automotive repair workflows.

Q: What surfaces can USC 32046 be applied to?
A: It is intended for properly prepared metal, aluminum, galvanized and other zinc-coated steel, primers, and existing finishes.

Q: How is this spot putty applied?
A: Apply 1-3 thin coats, allowing about 15 minutes between coats at 72 F (22 C), and avoid excessive film build.

Q: Can I topcoat over USC 32046 after it dries?
A: Yes. It may be topcoated with primer, primer surfacer, sealer, basecoat, and single stage refinish coatings after proper dry time and sanding as needed.