Blair 11094KX Karbon-X Premium Spot Weld Cutter, 3/8" Rotabroach with Arbor and Standard Pilot

Blair 11094KX Karbon-X Premium Spot Weld Cutter, 3/8" Rotabroach with Arbor and Standard Pilot

• The Blair 11094KX is a premium spot weld cutter designed to remove spot welds and plug welds while preserving the underlying metal panel. It includes a 3/8" Rotabroach cutter, an arbor, and a standard pilot, and uses a thick-wall design with two-step tooth geometry for chip splitting and evacuation. The cutter is intended for use with power drills fitted with a 3/8" or larger chuck, at speeds up to 500 RPM.
• Features:
  • Cuts around spot welds while leaving the underlying panel undamaged.
  • Heavy-duty thick-wall cutter construction for durability.
  • Two-step tooth geometry improves chip splitting and chip evacuation.
  • Suited for removing hundreds of spot welds before replacement, according to the supplied product information.
  • Suitable for both spot weld and plug weld removal.
  • Fits power drills with a 3/8" or larger drill chuck.
  • Maximum recommended speed of 500 RPM.
• Includes:
  • (1) 3/8" Rotabroach Cutter (11108-3)
  • (1) Arbor (11122)
  • (1) Standard Pilot (11121)
• Compatible Tools:
  • Power Drills with 3/8" or Larger Chuck
• Compatible Applications:
  • Spot Weld Removal
  • Plug Weld Removal
  • Collision Repair
  • Metal Fabrication
• Specifications:
  • Manufacturer: Blair
  • Part Number: 11094KX
  • Product Line: Karbon-X
  • Product Type: Premium Spot Weld Cutter
  • Cutter Size: 3/8"
  • Compatible Drill Chuck Size: 3/8" or Larger
  • Power Source: Hand-Powered Drill
  • Maximum Recommended Speed: 500 RPM
  • Product Dimensions: 6.7" x 5" x 1"
  • Item Weight: 0.16 oz.
  • Package Quantity: 1
  • Country of Origin: USA
  • Warranty: 1-Year, Material and Workmanship
• This item is also often referred to as a spot weld cutter, Rotabroach spot weld cutter, spot weld removal tool, plug weld cutter, and Blair spot weld drill.

Blair Equipment Company manufactures Rotabroach cutters, spot weld cutters, hole cutters, and annular cutters for automotive collision repair, metal fabrication, and industrial applications.

Q: What is the Blair 11094KX used for?
A: It is designed to remove spot welds and plug welds while minimizing damage to the underlying metal panel during automotive body repair and fabrication.

Q: What components are included with the Blair 11094KX?
A: The kit includes one 3/8" Rotabroach cutter (11108-3), one arbor (11122), and one standard pilot (11121).

Q: What drill is required to use this spot weld cutter?
A: The cutter is designed for use with power drills equipped with a 3/8" or larger drill chuck.

Q: What is the maximum recommended operating speed?
A: Blair recommends operating the cutter at a maximum speed of 500 RPM.