DeVilbiss SRIPRO-101-HS1 Replacement Air Cap, 4.8 scfm, 29 psi, for SRIPRO-635G-10 SRiPro Repair Gun

DeVilbiss SRIPRO-101-HS1 Replacement Air Cap, 4.8 scfm, 29 psi, for SRIPRO-635G-10 SRiPro Repair Gun

• The DeVilbiss SRIPRO-101-HS1 HS1 HVLP Air Cap & Retaining Ring Assembly is a replacement tip assembly for SRiPro spot repair spray guns. It supports 4.8 CFM atomization at a 29 psi inlet and produces an adjustable 1/4 to 9 inch spray pattern.
• Features:
  • Designed for SRiPro series spot repair guns direct replacement air cap & ring.
  • 29 psi inlet requirement optimized for HVLP performance at low pressure.
  • Air consumption 4.8 CFM delivers efficient airflow for fine atomization.
  • Spray pattern 1/4 to 9 inch versatile range for touch-up and small panel work.
• Specifications:
  • Manufacturer: DeVilbiss
  • Part Number: SRIPRO-101-HS1 (also cataloged under DV803296)
  • Air Consumption: 4.8 CFM (at 29 psi inlet)
  • Inlet Pressure: 29 psi required for proper atomization
  • Spray Pattern: 1/4 to 9 inch fan width (adjustable)
  • Compatible Use: SRiPro spot repair spray guns (e.g. SRIPRO-635G-10)
• DeVilbiss SRIPRO-101-HS1 also referred to as DeVilbiss HS1 air cap & retainer (SRIPRO-101-HS1), DV803296 HS1 cap kit, SRiPro HS1 replacement tip, DeVilbiss SRiPro HS1 HVLP cap assembly.

DeVilbiss is a leading manufacturer of professional spray finishing and painting equipment, known for its precision-engineered spray guns, air filtration systems, and accessories designed to deliver superior performance and finish quality across automotive and industrial applications.

Q: Will this air cap fit non-SRiPro guns?
A: It is specifically designed for SRiPro models, particularly SRIPRO-635G-10. Using it in other gun models may lead to poor atomization or fit issues.

Q: What happens if inlet pressure exceeds 29 psi?
A: Running higher inlet pressure may over-atomize the coating, reduce control, or lead to overspray and lower transfer efficiency.

Q: How can I tell this is the correct part?
A: Match your existing cap’s marking "HS1" and confirm your gun is an SRiPro series. Cross-check the part number DV803296 or SRIPRO-101-HS1 in your equipment manual or parts breakdown.