Fill-Rite FR4210H 12V DC Fuel Transfer Pump Kit, 20 GPM, 1" NPT, Manual Nozzle, 12' Hose, Telescoping Suction Pipe

Fill-Rite FR4210H 12V DC Fuel Transfer Pump Kit, 20 GPM, 1" NPT, Manual Nozzle, 12' Hose, Telescoping Suction Pipe

• Heavy-duty rotary vane pump for moving gasoline, diesel, kerosene, mineral spirits, ethanol blends up to E15, and biodiesel blends up to B20 from mobile transfer tanks. The self-priming pump mounts through a bung opening for equipment fueling applications.
• Features:
  • Cast-iron pump construction uses rotary vane technology.
  • Adjustable electrical junction box rotates 180 degrees for flexible wiring orientation.
  • Thermally protected motor and built-in mesh strainer protect the pumping system during operation.
  • Self-priming configuration has an 8' suction lift and 37' discharge head.
• Includes:
  • Fuel transfer pump
  • 1" cast aluminum manual nozzle
  • 1" x 12' discharge hose with static ground wire
  • 20" to 34-1/2" steel telescoping suction pipe
  • 18' 12 gauge battery cable with bare leads
  • Nozzle boot
  • PTFE tape roll
  • 1" NPT street elbow
  • Ground wire
  • Cable gland
  • 2 wire nuts
  • Locking nut
  • Fastener
• Specifications:
  • Manufacturer: Fill-Rite
  • Part Number: FR4210H
  • UPC: 089404247952
  • Maximum Flow Rate: 20 GPM / 75 LPM
  • Power: 12V DC
  • Motor Power: 0.25 HP
  • Maximum Current: 19 A
  • Construction: Cast iron
  • Inlet: 1" female NPT
  • Outlet: 1" female NPT
  • Mounting: 2" NPT bung mount
  • Maximum Operating Pressure: 16 psi
  • Suction Lift: 8'
  • Discharge Head: 37'
  • Duty Cycle: 30 minutes on, 30 minutes off
  • Compatible Fluids: Diesel, kerosene, biodiesel up to B20, gasoline up to E15, and mineral spirits
• The Fill-Rite FR4210H Fuel Transfer Pump Kit can also be referred to as 12V fuel transfer pump, 20 GPM fuel pump, rotary vane transfer pump, fuel transfer pump with manual nozzle, and transfer tank pump kit.

Fill-Rite, a Gorman-Rupp Company, manufactures fuel, oil, and chemical transfer equipment. Its product portfolio includes transfer pumps, meters, and fluid-transfer accessories.

Q: What mounting connection does the FR4210H use?
A: The pump uses a 2" NPT bung mount.

Q: What are the inlet and outlet connections?
A: Both the inlet and outlet are 1" female NPT connections.

Q: What is the operating duty cycle?
A: The duty cycle is 30 minutes on followed by 30 minutes off.

Q: Is the FR4210H self-priming?
A: Yes. It is self-priming with an 8' suction lift.

Q: What is the maximum operating pressure?
A: The maximum operating pressure is 16 psi.