Forney 251 Easy Weld 20 P Plasma Cutter, 120 Volt, 20 Amp

Forney 251 Easy Weld 20 P Plasma Cutter, 120 Volt, 20 Amp

• Forney 251 Easy Weld 20 P is a plasma cutter for sheet metal to thin plate cutting. It serves auto body, farm and ranch, HVAC, plumbing, contractor, metal art, and DIY applications.
• Features:
  • Drag Torch Technology lets the operator drag the tip directly on the work surface for smooth and precise cuts.
  • Recommended cutting thickness is up to 1/4" clean and up to 3/8" sever.
  • Built-in air pressure regulator and dryer, internal cooling fan, and thermal overload protection.
  • Requires clean, dry compressed air or nitrogen; air compressor not included.
  • Three diagnostic LED lights indicate input voltage, torch consumable fault, thermal protection, or low air pressure.
• Includes:
  • Forney Easy Weld 20 P plasma cutting machine
  • 13 ft cutting torch
  • 8 ft ground cable and clamp
  • 20 amp to 15 amp plug adapter
  • Additional electrode
  • Additional nozzle
• Specifications:
  • Manufacturer: Forney
  • Part Number: 251
  • UPC: 032277002517
  • Product Type: Plasma cutter
  • Product Line: Easy Weld 20 P
  • Input: 120 volt
  • Maximum Output: 20 amp
  • Duty Cycle: 35% at 20 amp
  • Air Supply: 60-100 PSI, approximately 1.5 CFM
  • Generator Requirement: Minimum 4,000 watts continuous output
  • Unit Weight: 21.5 pounds
  • Certification: CSA certified
• The Easy Weld 20 P Plasma Cutter can also be referred to as 120 volt plasma cutter, 20 amp plasma cutter, Easy Weld plasma cutter, drag torch plasma cutter, and portable plasma cutting machine.

Forney Industries is a family-owned welding and metalworking company founded in 1932 and headquartered in Fort Collins, Colorado. The company offers welding, abrasives, PPE, and shop tools for automotive, farm and ranch, DIY, and industrial users.

Q: What air supply does this plasma cutter require?
A: It requires clean, dry air or nitrogen at 60-100 PSI with approximately 1.5 CFM of flow.

Q: Can Forney 251 run from a generator?
A: Yes. The generator must supply a minimum of 4,000 watts of continuous output with no low-idle function or low-idle turned off.

Q: What cutting thickness is recommended for this plasma cutter?
A: Recommended cutting thickness is up to 1/4" clean and up to 3/8" sever.