Fusor 114LG Plastic Finishing Adhesive Fast, 2-Part Epoxy, 7.1 oz. Cartridge

Fusor 114LG Plastic Finishing Adhesive Fast, 2-Part Epoxy, 7.1 oz. Cartridge

• The Fusor 114LG plastic finishing adhesive is a fast-cure two-component epoxy formulated for cosmetic repair of scratches, pinholes, and surface imperfections on plastic bumpers and body panels.
• Features:
  • Fast cure: can be sanded to a perfect feather edge in 20 minutes or less
  • Adheres to all types of plastic panels without requiring an adhesion promoter
  • Does not act as a body filler — intended for surface finishing only
  • Compatible with plastics such as PP, fiberglass, Metton, Telene, SMC, TEO, urethane, and carbon fiber
• Includes:
  • One 7.1 oz (210 mL) dual-cartridge of Fusor 114LG adhesive (Part A and Part B)
  • Two static mixing nozzles
• Specifications:
  • Manufacturer: Parker LORD / Fusor
  • Part Number: 114LG
  • Type: 2-part epoxy finishing adhesive
  • Working Time: 1-2 minutes at 70 °F
  • Sand Time: 15-20 minutes at 70 °F
  • Paint Time: 60 minutes at 70 °F
  • Cure Time: 1 hour at 70 °F
  • Substrates: plastic bumpers, panels, and rigid plastics (PP, fiberglass, SMC, etc.)
• This adhesive is also referred to as Fusor 114LG fast plastic finishing adhesive, Fusor 114LG epoxy finishing glue, Fusor 114LG 2-part plastic repair adhesive, and Fusor 114LG (Fast) finishing adhesive.

Fusor 114LG is tailored for body shop finish work, enabling fast, seamless plastic repairs. Its fast-cure properties make it ideal where speed and finish quality are essential.

Q: Can this be used as a structural adhesive?
A: No. It is intended only for cosmetic finishing and not for structural or load-bearing repairs.

Q: Is an adhesion promoter required?
A: No. It bonds to plastic surfaces without needing a separate adhesion promoter.

Q: How soon after application can I sand and paint?
A: You can sand after about 20 minutes and proceed to paint in around 60 minutes at standard conditions.