GreenTec GTP10BQ GTP10B 2K DTM Polyurethane Black Primer, 1 Quart

GreenTec GTP10BQ GTP10B 2K DTM Polyurethane Black Primer, 1 Quart

• GreenTec GTP10BQ is part of the GTP10 high solids primer system for automotive, light industrial, and fleet refinish work. The system can be mixed as a DTM primer or as a sealer depending on activator and reducer setup.
• Features:
  • High solids formula has excellent adhesion to a variety of substrates and corrosion resistance.
  • Made for automotive, light industrial, and fleet market applications.
  • Application examples include OEM trailer and truck body manufacturers, signs and advertising manufacturers, airport ground support equipment, truck and trailer refinishing, and commercial auto and van refinish.
  • Black, White, and Light Gray versions can be blended in any combination before activation and reduction.
  • Two medium wet coats are applied with 10 to 20 minutes flash between coats.
• Specifications:
  • Manufacturer: GreenTec
  • Part Number: GTP10BQ
  • MPN: GTP10B(Q)
  • Product Family: GTP10
  • Product Type: 2K DTM polyurethane primer
  • Container Size: 1 Quart
  • Form: Liquid
  • Color: Black
  • Market: Automotive, light industrial, and fleet
  • Mixing Ratio as DTM Primer: 4 parts GTP10 to 1 part selected activator and up to 10 to 25 percent selected reducer
  • Mixing Ratio as Sealer: 4 parts GTP10 to 1 part selected activator and 2 parts selected reducer
  • Pot Life: 2 hours at 68 degrees Fahrenheit
  • Solids by Weight: 41.5 percent, 43.1 percent as mixed
  • Solids by Volume: 57.5 percent, 31.0 percent as mixed
  • VOC as Mixed: 4.57 lb/gal
  • VOC as Mixed with South Coast Reducers: 4.07 lb/gal
  • Dust Free: 30 minutes at 68 degrees Fahrenheit
  • Tack Free: 15 to 20 minutes at 68 degrees Fahrenheit
  • Sand Time: 2 to 4 hours at 68 degrees Fahrenheit
  • Topcoat Time: 1 hour
  • Force Dry Time: 20 minutes at 140 degrees Fahrenheit
  • Gun Setup: 1.3 to 1.5 Millimeter HVLP gravity feed or conventional
  • Surface Preparation: NORTHSTAR Clean Wipe S10 or S20
  • Cleanup: NORTHSTAR Lacquer Thinner or zero VOC solvents
  • Packaging Type: Each
  • Quantity: 1 each
• The GTP10B 2K DTM Polyurethane Black Primer can also be referred to as black DTM primer, direct to metal urethane primer, 2K polyurethane primer, automotive primer sealer, and GTP10BQ primer.

Lusid Technologies Inc. operates in Kearns, Utah and supplies GreenTec and GreenTec automotive refinish coatings, including primers, clearcoats, reducers, activators, sealers, binders, and factory pack products.

Q: How is GTP10 mixed as a DTM primer?
A: Mix 4 parts GTP10 with 1 part selected activator and up to 10 to 25 percent selected reducer.

Q: How is GTP10 mixed as a sealer?
A: Mix 4 parts GTP10 with 1 part selected activator and 2 parts selected reducer.

Q: What should be used to clean the substrate before applying GTP10?
A: Use NORTHSTAR Clean Wipe S10 or S20 to clean the substrate free of grease, dirt, and foreign contaminants.