GreenTec GTP10WQ 2K DTM PU White Primer, 1 Quart

GreenTec GTP10WQ 2K DTM PU White Primer, 1 Quart

• GreenTec GTP10WQ is the quart configuration of the GTP10 white direct to metal urethane primer system for automotive, light industrial, and fleet refinish work. The system is mixed with selected activators and reducers for primer or sealer use.
• Features:
  • High solids GTP10 formula has excellent adhesion to a variety of substrates and corrosion resistance.
  • GTP10 is an SC product compliant with applicable rules in South Coast areas.
  • Application examples include OEM trailer and truck body manufacturers, signs and advertising manufacturers, airport ground support equipment, truck and trailer refinishing, and commercial auto and van refinish.
  • Black, White, and Light Gray versions can be blended in any combination before activation and reduction.
  • Application uses two medium wet coats with 10 to 20 minutes flash between coats.
• Specifications:
  • Manufacturer: GreenTec
  • Part Number: GTP10WQ
  • MPN: GTP10W(Q)
  • UPC: 852689237648
  • Product Family: GTP10
  • Product Type: Direct to metal 2K urethane primer
  • Container Size: 1 Quart
  • Container Type: Can
  • Form: Liquid
  • Color: White
  • Rubberized: Without Rubberized
  • VOC as Mixed: 4.57 lb/gal
  • VOC as Mixed with SC60/70/85 South Coast Reducers: 4.07 lb/gal
  • VOC Content: 36.59 Percent, 381.9 g/L, 3.19 lb/gal
  • Solids Content: 67.5 Percent
  • Mixing Ratio as DTM Primer: 4 parts GTP10 to 1 part selected activator and up to 10 to 25 Percent selected reducer
  • Mixing Ratio as Sealer: 4 parts GTP10 to 1 part selected activator and 2 parts selected reducer
  • Pot Life: 2 Hours at 68 Degrees Fahrenheit
  • Dust Free: 30 Minutes at 68 Degrees Fahrenheit
  • Tack Free: 15 to 20 Minutes at 68 Degrees Fahrenheit
  • Sand Time: 2 to 4 Hours at 68 Degrees Fahrenheit
  • Topcoat Time: 1 Hour
  • Force Dry Time: 20 Minutes at 140 Degrees Fahrenheit
  • Gun Setup: 1.3 to 1.5 Millimeter HVLP gravity feed or conventional
  • Film Build: 25 to 50 Mils when applied as directed
  • Surface Preparation: NORTHSTAR Clean Wipe S10 or S20
  • Cleanup: NORTHSTAR Lacquer Thinner or zero VOC solvents
  • Substrates: Galvanized Steel, Stainless Steel, Aluminum, Brass
  • Packaging Type: Each
  • Quantity: 1 each
• The GTP10WQ 2K DTM PU White Primer can also be referred to as white DTM primer, direct to metal urethane primer, 2K polyurethane primer, automotive primer sealer, and GTP10WQ primer.

Lusid Technologies Inc. operates in Kearns, Utah and supplies GreenTec automotive refinish coatings, including primers, sealers, activators, reducers, binders, clearcoats, and factory pack products.

Q: How is GTP10 mixed as a DTM primer?
A: Mix 4 parts GTP10 with 1 part selected activator and up to 10 to 25 percent selected reducer.

Q: How is GTP10 mixed as a sealer?
A: Mix 4 parts GTP10 with 1 part selected activator and 2 parts selected reducer.

Q: Which substrates are named for GTP10?
A: Galvanized Steel, Stainless Steel, Aluminum, and Brass are named substrates.