High Teck 8425-5 NR/SC Eco Clear Clearcoat, 5 Liter

High Teck 8425-5 NR/SC Eco Clear Clearcoat, 5 Liter

• High Teck 8425-5 is an economy euro clearcoat for automotive, parts painting, and truck painting over basecoat. The medium solids formula requires no reduction and works with multiple activator speeds.
• Features:
  • Meets National Rule standards for automotive refinish clearcoat applications.
  • Use with High Teck 8426-25 fast activator, 8427-25 medium activator, or 8428-25 slow activator.
  • Applies in two to three medium wet coats with 10 to 15 minutes flash time between coats.
  • Spray gun setup uses a 1.3 to 1.5 Millimeter tip and needle for HVLP gravity feed or conventional application.
  • Sand and polish time is 12 to 24 hours at 77 degrees Fahrenheit.
• Specifications:
  • Manufacturer: High Teck
  • Part Number: 8425-5
  • Product Type: Automotive Clearcoat
  • Container Size: 5 Liter
  • Clear Type: Medium Solids Clear
  • Mix Ratio: 2:1
  • Compatible Activators: 8426-25 Fast Activator, 8427-25 Medium Activator, 8428-25 Slow Activator
  • Pot Life: 2 hours at 77 degrees Fahrenheit
  • Application: Two to three medium wet coats
  • Flash Time: 10 to 15 minutes between coats
  • Spray Gun Tip and Needle: 1.3 to 1.5 Millimeter
  • Film Build: 50 to 62.5 Microns
  • Regulatory VOC: 299.5 g/L
  • Actual VOC: 171.6 g/L
  • Package Type: Each
• The NR/SC Eco Clear Clearcoat can also be referred to as automotive clearcoat, economy euro clearcoat, National Rule clearcoat, medium solids clearcoat, and refinish clear coat.

High Teck supplies automotive refinish products for collision repair and paint operations, including coatings, primers, clears, fillers, abrasives, and related paint system materials.

Q: What activators are used with High Teck 8425-5?
A: High Teck 8425-5 works with 8426-25 fast activator, 8427-25 medium activator, and 8428-25 slow activator.

Q: Does this clearcoat require reduction?
A: No. High Teck 8425-5 is a medium solids clear that requires no reduction.

Q: What is the recommended application method?
A: Apply two to three medium wet coats and allow 10 to 15 minutes flash time between coats.