High Teck HFP158-1 Series HFP National Rule Urethane Basecoat, Super White Toyota 040, 1 Gallon, 6.8 lb/gal VOC

High Teck HFP158-1 Series HFP National Rule Urethane Basecoat, Super White Toyota 040, 1 Gallon, 6.8 lb/gal VOC

• High Teck HFP158-1 is a Series HFP National Rule urethane basecoat for automotive refinish overalls, large blend-area repairs, and ground-coat work. The factory-pack color may be tinted with high quality basecoat and top coated with high quality clearcoat.
• Features:
  • HFP-Series Urethane Basecoat is a quick dry, good hiding factory-pack line for popular OEM colors.
  • High quality polyester composition.
  • Factory-pack colors are blendable to match many OEM paint codes.
  • May be mixed 1:1 by volume with high grade urethane reducer.
  • Factory-pack basecoats are available in gallons and quarts.
• Specifications:
  • Manufacturer: High Teck
  • Part Number: HFP158-1
  • UPC: 813834013487
  • Product Type: Series HFP National Rule Urethane Basecoat
  • Container Size: 1 Gallon
  • Color: Super White
  • OEM Color Code: Toyota 040
  • Composition: Polyester Basecoat
  • VOC: Maximum 6.8 lb/gal Ready to Spray
  • Mixing Ratio: 1:1 by Volume with Reducer
  • Reducer: Urethane-Grade Universal Reducer
  • Optional Hardener: Up to 10 Percent of Unreduced Color Portion with Appropriate Isocyanate Hardener
  • Application: Overalls, Large Blend Area Repairs, and Ground-Coat Material
  • Coats: 2 to 4 Single Coats or Until Full Coverage Is Achieved
  • Flash Time Between Coats: Approximately 5 to 10 Minutes at 70 Fahrenheit
  • Clearcoat Window: 20 Minutes Minimum and 24 Hours Maximum at 70 Fahrenheit
  • Pot Life: Indefinite if Not Catalyzed
  • Viscosity at Gun: 13 to 15 Seconds Number 4 Zahn
  • Recommended Film Thickness: Approximately 0.4 to 0.8 Mil
  • Coverage: 286 Square Feet per Gallon at 0.6 Mil
  • Final Dry Sanding: P500 to P600 Grit
  • Final Wet Sanding: P800 to P1000 Grit
  • Spray Gun Setup: 1.3 to 1.5 Millimeter Gravity Feed or HVLP, 1.6 to 1.8 Millimeter Siphon Feed
  • Packaging Type: Gallon Container
• The Series HFP National Rule Urethane Basecoat can also be referred to as High Teck HFP158-1 basecoat, Super White urethane basecoat, Toyota 040 basecoat, National Rule automotive basecoat, and 1 Gallon refinish basecoat.

High Teck works within the Paint, Body and Equipment market through distributor partnerships and focuses on quality, affordability, and customer commitment across automotive refinish products and shop supplies.

Q: What reducer is used with HFP158-1?
A: Use urethane-grade universal reducer at a 1:1 mix by volume.

Q: What sanding finish is recommended before application?
A: Use P500 to P600 grit for final dry sanding or P800 to P1000 grit for final wet sanding.

Q: When can clearcoat be applied?
A: Allow a minimum of 20 minutes and a maximum of 24 hours flash time at 70 Fahrenheit before clearcoat; if the maximum is exceeded, scuff the surface and apply another coat.