High Teck HFP158C-1 Series HFP Low VOC Urethane Basecoat, Super White Toyota 040, 1 Gallon, 6.8 lb/gal VOC

High Teck HFP158C-1 Series HFP Low VOC Urethane Basecoat, Super White Toyota 040, 1 Gallon, 6.8 lb/gal VOC

• High Teck HFP158C-1 is an HFP-VOC Series polyester basecoat for automotive refinish overalls, large blend-area repairs, and ground-coat work. The factory-pack formula is part of a basecoat and clearcoat refinish system and may be top coated with high quality clearcoat.
• Features:
  • HFP-VOC Series Polyester Basecoat is a quick dry, good hiding factory-pack line for popular OEM colors.
  • High quality polyester composition.
  • Factory-pack colors are blendable to match many OEM paint codes and may be tinted with high quality basecoat.
  • May be mixed 1:1 by volume with VOC-grade universal reducer.
  • May be catalyzed up to 10 percent of the unreduced color portion with appropriate isocyanate hardener.
• Specifications:
  • Manufacturer: High Teck
  • Part Number: HFP158C-1
  • UPC: 813834013500
  • Product Type: Series HFP Low VOC Urethane Basecoat
  • Container Size: 1 Gallon
  • Color: Super White
  • OEM Color Code: Toyota 040
  • Composition: Polyester Basecoat
  • VOC Compliance: VOC Compliant
  • Product VOC: 6.8 lb/gal
  • VOC at Gun: Maximum 3.5 lb/gal Ready to Spray
  • Mixing Ratio: 1:1 by Volume with Reducer
  • Reducer: VOC-Grade Universal Reducer
  • Optional Catalyst: Up to 10 Percent of Unreduced Color Portion with Appropriate Isocyanate Hardener
  • Application: Overalls, Large Blend Area Repairs, and Ground-Coat Material
  • Coats: 2 to 4 Single Coats or Until Full Coverage Is Achieved
  • Flash Time Between Coats: Approximately 5 to 10 Minutes at 70 Fahrenheit
  • Clearcoat Window: 20 Minutes Minimum and 24 Hours Maximum at 70 Fahrenheit
  • Pot Life: Indefinite if Not Catalyzed
  • Viscosity at Gun: 13 to 15 Seconds Number 4 Zahn
  • Recommended Film Thickness: Approximately 0.4 to 0.8 Mil
  • Coverage: 286 Square Feet per Gallon at 0.6 Mil
  • Final Dry Sanding: P500 to P600 Grit
  • Final Wet Sanding: P800 to P1000 Grit
  • Spray Gun Setup: 1.3 to 1.5 Millimeter Gravity Feed or HVLP, 1.6 to 1.8 Millimeter Siphon Feed
  • Packaging Type: Gallon Container
• The Series HFP Low VOC Urethane Basecoat can also be referred to as High Teck HFP158C-1 basecoat, Super White urethane basecoat, Toyota 040 basecoat, Low VOC automotive basecoat, and 1 Gallon refinish basecoat.

High Teck supplies the Paint, Body and Equipment market through distributor partnerships, with product categories spanning automotive refinishing coatings, primers, solvents, abrasives, tools, and related shop supplies.

Q: How is this basecoat mixed for spray application?
A: Mix 1 part HFP-Series basecoat with 1 part VOC-grade universal reducer by volume.

Q: When can clearcoat be applied over the basecoat?
A: Allow a minimum of 20 minutes and a maximum of 24 hours flash time at 70 Fahrenheit before clearcoat; if the maximum is exceeded, scuff the surface and apply another coat.

Q: What final sanding grits are recommended before application?
A: Use P500 to P600 grit for final dry sanding or P800 to P1000 grit for final wet sanding.