Kirker Automotive Finishes EPC611-1 Enduro Prime DTM Epoxy Primer Catalyst, 1:1 Mixing Ratio, 1 Gallon Can

Kirker Automotive Finishes EPC611-1 Enduro Prime DTM Epoxy Primer Catalyst, 1:1 Mixing Ratio, 1 Gallon Can

• Kirker Automotive Finishes EPC611-1 Enduro Prime is a liquid epoxy primer catalyst used with compatible Kirker Enduro Prime DTM epoxy primers. The catalyst is mixed with Enduro Prime primer before application for direct-to-metal automotive refinish and restoration work.
• Features:
  • For use with Kirker Enduro Prime DTM epoxy primers.
  • Mixes one part Enduro Prime epoxy primer with one part EPC611 Epoxy Primer Catalyst.
  • Enduro Prime system may be applied over properly prepared steel, aluminum, fiberglass, body fillers, and existing finishes.
  • No induction time is required before application in the Enduro Prime system.
  • Low 2.1 lb/gal VOC epoxy primer catalyst system.
• Specifications:
  • Manufacturer: Kirker Automotive Finishes
  • Part Number: EPC611-1
  • MPN: EPC611
  • UPC: 674132000186
  • Product Type: Epoxy primer catalyst
  • Coating System: Enduro Prime DTM epoxy primer
  • VOC: 2.1 lb/gal
  • Mixing Ratio: 1:1
  • Capacity: 1 Gallon
  • Package Measure: 128 Fluid Ounces
  • Container Type: Can
  • Quantity: 1 gallon can
• The Enduro Prime DTM Epoxy Primer Catalyst can also be referred to as epoxy primer catalyst, DTM primer catalyst, automotive primer hardener, 1:1 epoxy catalyst, and Kirker Enduro Prime catalyst.

Kirker Automotive Finishes manufactures automotive paint, primer, clearcoat, and refinish materials from Newburgh, New York. The company has produced automotive refinish coatings since 1898.

Q: What primer system uses this catalyst?
A: This catalyst is used with Kirker Enduro Prime DTM epoxy primers.

Q: What is the mixing ratio for this catalyst?
A: The mixing ratio is one part Enduro Prime epoxy primer to one part EPC611 Epoxy Primer Catalyst.

Q: Does the mixed Enduro Prime system require induction time?
A: No. No induction time is required before application.