Kirker Automotive Finishes UA10378-1 ULTRA-GLO Diamond Pearl Acrylic Urethane Topcoat, Mandarin Pearl, 3:1 Mixing Ratio, 0.75 Gallon Can

Kirker Automotive Finishes UA10378-1 ULTRA-GLO Diamond Pearl Acrylic Urethane Topcoat, Mandarin Pearl, 3:1 Mixing Ratio, 0.75 Gallon Can

• Kirker Automotive Finishes UA10378-1 ULTRA-GLO Diamond Pearl is a single-stage acrylic urethane topcoat for automotive and fleet refinishing. The coating uses the ULTRA-GLO color system and is supplied as a factory-packaged Mandarin Pearl finish.
• Features:
  • Diamond Pearl DP Series combines soft pearls and intense pigments for subtle color-shifting effects.
  • Mixes three parts urethane topcoat with one part UA-1600 activator.
  • No reduction is necessary, but Kirker recommends no more than 10 percent reducer if reduction is used.
  • At 68 Fahrenheit, the coating should set to the touch within 20 minutes and dry within one hour.
  • For best results, apply over an opaque ground coat.
• Specifications:
  • Manufacturer: Kirker Automotive Finishes
  • Part Number: UA10378-1
  • MPN: UA-10378
  • Product Type: Acrylic urethane topcoat
  • Product Line: ULTRA-GLO Diamond Pearl
  • Color: Mandarin Pearl
  • Coating Type: Single-stage acrylic urethane
  • Finish: High gloss
  • VOC: 2.8 lb/gal
  • Mixing Ratio: 3:1
  • Capacity: 0.75 Gallon
  • Package Measure: 96 Fluid Ounces
  • Container Type: Can
  • Quantity: 1 can
• The ULTRA-GLO Diamond Pearl Acrylic Urethane Topcoat can also be referred to as acrylic urethane paint, single-stage urethane paint, Mandarin Pearl topcoat, Diamond Pearl automotive paint, and automotive refinish paint.

Kirker Automotive Finishes manufactures automotive paint, primer, clearcoat, and refinish materials from Newburgh, New York. The company has produced automotive refinish coatings since 1898.

Q: What activator ratio is used with this topcoat?
A: This topcoat mixes three parts urethane topcoat with one part UA-1600 activator.

Q: Is reducer required with this topcoat?
A: No. Reduction is not necessary, but Kirker recommends no more than 10 percent reducer if reduction is used.

Q: What ground coat is recommended for this color?
A: For best results, this topcoat should be applied over an opaque ground coat.