Like90 10018 Booth Coating, Clear Washable Spray Booth Coating, 1 Gallon

Like90 10018 Booth Coating, Clear Washable Spray Booth Coating, 1 Gallon

• Like90 10018 Booth Coating forms a non-tacky, clear dry film over lights and booth fixtures while resisting solvents and overspray build-up. The spray-on, water-soluble coating clings to vertical surfaces, washes off with water, and uses a water-based, low VOC, non-hazardous formula.
• Features:
  • Non-tacky, clear dry film preserves booth lighting conditions for uniform paintwork, covers lights and booth fixtures, and will not yellow with age.
  • Solvent resistant coating prevents overspray build-up on booth surfaces, reducing maintenance costs and minimizing booth down-time.
  • Spray-on liquid applies with conventional spray equipment already in use.
  • Thixotropic one-coat formula clings to vertical surfaces, eliminates the requirement for multiple coats, and minimizes drips and runs.
  • Water-soluble film washes off with water after 150 bake cycles; with two-coat application, large sections can be peeled from glass and smooth, texture-free surfaces.
• Specifications:
  • Manufacturer: Bonding Solutions, LLC
  • Part Number: 10018
  • Brand: Like90
  • Product Type: Washable Booth Coating
  • Capacity: 1 gallon
  • Packaging Type: 1-gallon bottle
  • Recommended Use: Temporary overspray protection for paint spray booth surfaces
  • Color: Clear liquid
  • VOC Content: Less than 60 grams per liter
  • Coverage: About 267 square feet per gallon at 6 wet mils
  • Application Thickness: 4 to 6 wet mils
  • Conventional, HVLP, Gravity Feed Settings: 40 to 45 psi at the gun; 2.2 to 2.5mm spray tip orifice
  • Flash Point: Greater than 200 degrees F
  • Boiling Point: 212 degrees F
  • pH: 6 to 7
  • Specific Gravity: 1.03
  • Formula: Water-based, low VOC, non-hazardous
  • HMIS Ratings: Health 1, Fire 1, Physical Hazard 0
  • UPC: 616641751760
• The Like90 10018 Booth Coating can also be referred to as washable booth coating, spray booth coating, paint booth wall coating, overspray protection coating, and water-based booth coating.

Bonding Solutions distributes Like90 products from Sparks, Nevada, with focus areas in spray booth maintenance, surface preparation and protection, and corrosion protection. The company also markets Plio Grip and Walcom collision repair product categories.

Q: What wet film thickness is recommended?
A: Apply a 4 to 6 mil wet coat to booth surfaces and avoid runs, drips, or beads.

Q: What spray settings are listed for conventional, HVLP, or gravity feed equipment?
A: Use 40 to 45 psi at the gun with a 2.2 to 2.5mm spray tip orifice.

Q: When should the coating be removed and reapplied?
A: Remove and reapply every 150 bake cycles for maximum performance.