Like 90 10052 White Wash Washable Booth Coating, 5 Gallon Pail, White

Like 90 10052 White Wash Washable Booth Coating, 5 Gallon Pail, White

• Like 90 10052 White Wash is a water-based, low-VOC washable booth coating for spray booth walls and doors. It covers existing overspray, can be recoated between full maintenance cycles, and washes off with water during booth maintenance.
• Features:
  • Spray-on liquid applies with conventional spray equipment already used in the shop.
  • Water-soluble film washes off with water after extended use.
  • White finish covers existing overspray and restores brighter booth lighting conditions.
  • Coating can be overcoated up to four times between full removal cycles.
  • Technical coverage is about 535 Square Feet per Gallon per 3 Mil wet coat.
• Specifications:
  • Manufacturer: Like 90
  • Part Number: 10052
  • Product Type: Washable Booth Coating
  • Size: 5 Gallon
  • Container Type: Pail
  • Color: White
  • Form: Liquid
  • Coverage: About 535 Square Feet per Gallon per 3 Mil wet coat
  • VOC Content: 10 Grams per Liter calculated, less water and exempt compounds
  • Application Method: HVLP spray gun, pressure pot, or airless spray equipment
  • Application Surface: Spray booth walls and doors
  • Overcoat Limit: Up to four times
  • Recommended Removal Interval: At least every 6 months
  • Removal Method: Water wash removal
  • Packaging Type: 5 Gallon Pail
• The White Wash Washable Booth Coating can also be referred to as washable booth coating, spray booth wall coating, water-soluble booth coating, white booth coating, and booth overspray protection coating.

Like 90 supplies spray booth maintenance and surface protection products for collision repair, refinish, and industrial coating environments, including washable coatings, peelable coatings, glass protection, floor protection, and particle control products.

Q: What spray equipment can apply Like 90 10052 White Wash?
A: It can be applied with an HVLP spray gun, pressure pot, or airless spray equipment.

Q: How many times can White Wash be overcoated?
A: White Wash can be overcoated up to four times before full removal and reapplication.

Q: How is the coating removed from booth surfaces?
A: Spray water onto the coated surfaces, scrub heavy overspray areas with a wash mitt or brush, rinse the surfaces again, and allow the booth to dry before reapplication.