Like90 10008 Particle Control Paint Booth Floor Coating, 1 Gallon

Like90 10008 Particle Control Paint Booth Floor Coating, 1 Gallon

• Like90 10008 Particle Control turns dust into "heavy dirt" and traps airborne dust on the floor for cleaner paintwork. The water-based, low VOC, non-hazardous formula breaks up existing overspray, reduces booth washouts with water, and is ideal for water-borne paint systems.
• Features:
  • Turns dust into "heavy dirt" and traps airborne dust on the floor for cleaner paintwork.
  • Makes it faster and easier to sweep the booth out for the next job.
  • Long-lasting formula needs application just twice a day, and even once a day application makes a significant difference.
  • Water-based, low VOC, non-hazardous, environmentally friendly formula eliminates the need to wash out booths with water.
  • Breaks up existing overspray, helps restore floor and grates to original condition, prevents future buildup, and controls contamination when booth airflow is increased to speed dry times.
• Specifications:
  • Manufacturer: Bonding Solutions, LLC
  • Part Number: 10008
  • Brand: Like90
  • Product Type: Paint Booth Floor Coating
  • Capacity: 1 gallon
  • Packaging Type: Bottle
  • Color: Clear liquid
  • Recommended Use: Dust control spray for paint booth floors
  • Application Method: Standard pump sprayer
  • Coverage: About 1000 square feet per gallon
  • VOC Content: Less than 60 grams per liter
  • pH: 6 to 9
  • Specific Gravity: 1.01
  • Flash Point: Greater than 200 degrees F
  • Boiling Point: 212 degrees F
  • OSHA HCS Classification: Not classified as hazardous
  • UPC: 616641751661
• The Like90 10008 Particle Control Paint Booth Floor Coating can also be referred to as paint booth floor coating, dust control spray, spray booth dust control, water-based floor coating, and paint booth particle control.

Bonding Solutions is an automotive aftermarket supplier in Sparks, Nevada, with Like90, Plio Grip, and Walcom product categories for collision repair, paint booth maintenance, plastic repair, corrosion protection, and application equipment.

Q: How much product is used for a typical booth floor?
A: Apply Particle Control sparingly; about one quart treats a typical booth floor. Excessive amounts can make floors slippery.

Q: How should Particle Control be applied on shop floors?
A: Reduce it with water at 2:1, apply a uniform mist coat directly on loose dirt or dust, then sweep the floor to remove dirt and dust.

Q: What hazard classification is listed in the SDS?
A: The SDS states that Particle Control is not classified as hazardous under OSHA 29 CFR 1910.1200 HCS and has HMIS ratings of 0 for health, fire, and physical hazard.