user
Log Out
 
Free shipping on orders above $75.
Same day shipping on orders in by 2PM EST!
cart

My Shopping Cart
Your shopping cart is empty
 
 
Loctite 263 Threadlocker Red, Surface Insensitive, 36 ml Bottle (2205310) Loctite 2205310
View Larger

Loctite 263 Threadlocker Red, Surface Insensitive, 36 ml Bottle (2205310)

Item # 2205310
$21.79
 
Quantity:      On Hand: 5QTY_CHECK:5-net:5-DB:5-VSTOCK:0
Sold As: each
 
 
Loctite
More Products from Loctite
 
  Add to Shopping List
  Save For Later
 

Overview

 

Loctite 263 Threadlocker Red, Surface Insensitive, 36 ml Bottle (2205310)

  • LOCTITE 263 is a red, dual cure, acrylic dimethacrylate ester fluorescent threadlocker designed for the permanent locking and sealing of threaded fasteners
  • It cures between close fitting metal surfaces and prevents loosening and leakage from shock and vibration
  • It works on active metals (e.g. brass, copper) and passive substrates such as stainless steel and plated surfaces
  • Features
    • Particularly suited for heavy duty applications such as studs into motor housings where high strength is required
    • Prevents loosening and leakage from shock and vibration
    • Designed for the permanent locking and sealing of threaded fasteners
    • Provides robust curing performance
    • Offers high temperature performance and oil tolerance
  • Specifications
    • Agency Approvals / Certificates / Specifications: NSF/ANSI 61
    • Application Method: Dispense System, Manual
    • Application Temperature: -65.0 - 360.0 °F (-55.0 - 180.0 °C )
    • Applications: Threadlocking
    • Breakaway Torque, M10 Steel Nuts/Bolts: 33.0 N·m (290.0 in./lb. )
    • Color: Red
    • Cure Type: Anaerobic Cure
    • Fixture Time: 10.0 min.
    • Key Characteristics: Disassembly: Disassembly with Heat, Fluorescent, General Purpose, Oil Tolerant, Primerless, Strength: High Strength
    • Physical Form: Liquid
    • Prevail Torque, M10 Steel Nuts/Bolts: 33.0 N·m (290.0 in./lb. )
    • Specific Gravity, @ 25.0 °C: 1.1
    • Substrates: Metal, Metal: Passive Metal
    • Technology: Acrylic
    • Viscosity, 20 RPM: 500.0 mPa·s (cP)
    • UPC: 079340011656
  • How To
    • 1. Preparation - Cleaning
      • It is recommended to use LOCTITE SF 7070 to degrease and clean surfaces prior to applying threadlocker.
    • 2. Preparation - Activation
      • If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperature (below 5°C), use LOCTITE SF 7649 activator. Allow to dry.
    • 3a. Application - Through Hole
      • Apply a few drops of liquid threadlocker to the thread engagement area. Assemble nut and tighten to proper torque.
    • 3b. Application - Blind Hole
      • Apply several drops of liquid threadlocker into lower third of blind hole, as well as a few drops onto male threads, and then install male threads. Tighten to proper torque.
    • 4. Assembly
      • Assemble and tighten to proper torque requirement. If several bolts are being assembled, torque them down to the correct value within the fixture time window.
    • 5a. Disassembly - Hand Tools
      • Disassemble with standard hand tools.
    • 5b. Disassembly - Heat
      • If disassembly is not possible using normal hand tools, apply localized heat to approximately 500°F/260°C. Disassemble while hot with standard hand tools.
 
 

In This Category

 
3M Scotch 06195 48 Series Premium Grade Thread Sealant and Lubricant Tape, 260 x 1/2 in, White
3M Scotch 06195 48 Series Premium Grade Thread Sealant ...
--- #06195 ---
 $13.50 
Qty:  
Loctite 262 Threadlocker Red High Strength, 36 ml Bottle (492141)
Loctite 262 Threadlocker Red High Strength, 36 ml Bottl...
--- #37478 ---
 $24.06 
Qty:  
Loctite 271 Threadlocker Red Heavy Duty, High Strength, High Temp, Fluorescent, Anaerobic, 36 ml Bottle
Loctite 271 Threadlocker Red Heavy Duty, High Strength,...
--- #37479 ---
 $20.49 
Qty:  
Loctite 290 Threadlocker Green Penetrating, 36 ml Bottle
Loctite 290 Threadlocker Green Penetrating, 36 ml Bottl...
--- #37481 ---
 $22.44 
Qty: