LORD Fusor 122EZ Medium Self-Leveling Seam Sealer, Blue, 10.1 Ounce Cartridge

LORD Fusor 122EZ Medium Self-Leveling Seam Sealer, Blue, 10.1 Ounce Cartridge

• LORD Fusor 122EZ is a two-component epoxy-based seam sealer for automotive collision repair. It is used to duplicate factory seams on drip rails, trunks, core support to apron seams, roof seams, and quarter panel to rear deck seams.
• Features:
  • Self-leveling formula matches factory flow-grade seams without required tooling.
  • Flexible seal has no shrinkage, cracking, or sagging after application.
  • Color change indicates full cure during the repair process.
  • Work time is 8 minutes at 70 degrees Fahrenheit, with 30 minute sand and paint times at 70 degrees Fahrenheit.
  • Apply over cured two-component primer; acid-etch primers are not recommended under this sealer.
• Specifications:
  • Manufacturer: LORD Fusor Adhesives
  • Part Number: 122EZ
  • UPC: 808498100109
  • Product Type: Medium self-leveling seam sealer
  • Base Chemistry: Epoxy
  • Component Type: Two-component
  • Color: Blue
  • Container Size: 10.1 Ounce
  • Container Type: Cartridge
  • Work Time: 8 minutes at 70 Degrees Fahrenheit
  • Sand Time: 30 minutes at 70 Degrees Fahrenheit
  • Paint Time: 30 minutes at 70 Degrees Fahrenheit
  • Cure Time: 24 hours at 70 Degrees Fahrenheit
  • Application: Drip rails, trunks, core support to apron seams, roof seams, and quarter panel to rear deck seams
  • Quantity: 1 Cartridge
• The LORD Fusor 122EZ Medium Self-Leveling Seam Sealer can also be referred to as Fusor self-leveling seam sealer, medium seam sealer, epoxy seam sealer, automotive body seam sealer, and flow-grade seam sealer.

Parker LORD is a Parker Hannifin business that develops adhesives, coatings, thermal management materials, and motion control technologies for transportation, industrial, aerospace, and electronics markets.

Q: Does LORD Fusor 122EZ require tooling after application?
A: Tooling is not required for a factory-look finish, although the sealer can be tooled if needed.

Q: How soon can LORD Fusor 122EZ be sanded or painted?
A: It can be sanded and painted in 30 minutes at 70 degrees Fahrenheit.

Q: What primer type is used under LORD Fusor 122EZ?
A: Apply it over cured two-component primer. Acid-etch primers are not recommended under this sealer.