LORD Fusor 123SL Slow Non-Sag Seam Sealer, White Paste, 10.1 Ounce Cartridge, 48 Hour Cure

LORD Fusor 123SL Slow Non-Sag Seam Sealer, White Paste, 10.1 Ounce Cartridge, 48 Hour Cure

• LORD Fusor 123SL is a two-component urethane-based seam sealer for automotive collision repair. It duplicates factory appearance on truck bed, tooled door skin, floor pan, and core support seams.
• Features:
  • Longer work time is suitable for larger projects and high ambient temperature applications.
  • Direct application to bare metal or primed surfaces.
  • Bonds bare metal, epoxy two-component primed surfaces, and urethane two-component primed surfaces.
  • Flexible seal has no shrinkage, cracking, or sagging after application.
  • Acid-etch primers are not recommended under this sealer.
• Specifications:
  • Manufacturer: LORD Fusor Adhesives
  • Part Number: 123SL
  • UPC: 808498101793
  • Product Type: Slow non-sag seam sealer
  • Base Chemistry: Urethane
  • Component Type: Two-component
  • Color: White
  • Form: Paste
  • Container Size: 10.1 Ounce
  • Container Type: Cartridge
  • Work Time: 45 Minutes at 70 Degrees Fahrenheit
  • Paint Time: 90 Minutes at 70 Degrees Fahrenheit
  • Cure Time: 48 Hours at 70 Degrees Fahrenheit
  • Accelerated Cure Time: 45 Minutes at 140 Degrees Fahrenheit
  • Application: Truck bed seams, tooled door skin seams, floor pan seams, and core support seams
  • Compatible Surfaces: Bare metal, epoxy two-component primed surfaces, and urethane two-component primed surfaces
  • Quantity: 1 Cartridge
• The LORD Fusor 123SL Slow Non-Sag Seam Sealer can also be referred to as Fusor slow non-sag seam sealer, urethane seam sealer, automotive body seam sealer, white seam sealer cartridge, and factory appearance seam sealer.

Parker LORD is a Parker Hannifin business that develops adhesives, coatings, thermal management materials, and motion control technologies for transportation, industrial, aerospace, and electronics markets.

Q: Which seam locations is LORD Fusor 123SL used on?
A: LORD Fusor 123SL is used on truck bed seams, tooled door skin seams, floor pan seams, and core support seams.

Q: What surfaces can LORD Fusor 123SL be applied to?
A: It can be applied directly to bare metal or primed surfaces, including epoxy and urethane two-component primed surfaces.

Q: What are the work, paint, and cure times for LORD Fusor 123SL?
A: Work time is 45 minutes at 70 degrees Fahrenheit, paint time is 90 minutes at 70 degrees Fahrenheit, and cure time is 48 hours at 70 degrees Fahrenheit.