LORD Fusor 127EZ Slow Plastic Bonding Adhesive, Off-White Paste, 10.1 Ounce Cartridge

LORD Fusor 127EZ Slow Plastic Bonding Adhesive, Off-White Paste, 10.1 Ounce Cartridge

• LORD Fusor 127EZ is a two-component urethane plastic bonding adhesive for automotive collision repair. It bonds plastic body panels, spoilers, and ground effects in structural applications across SMC, fiberglass, carbon fiber, plastics, and primed metal.
• Features:
  • Extended work time for bonding large primed metal or plastic parts.
  • Non-sag formula remains in position on vertical and overhead surfaces.
  • Work time is 50 minutes at 70 degrees Fahrenheit, with a 5 hour clamp time at 70 degrees Fahrenheit.
  • Recommended bead size is 1/2 Inch to fill gaps between the panel and inner reinforcement.
  • Bare metal should be primed with two-component epoxy primer before bonding.
• Specifications:
  • Manufacturer: LORD Fusor Adhesives
  • Part Number: 127EZ
  • UPC: 808498100390
  • Product Type: Slow plastic bonding adhesive
  • Base Chemistry: Urethane
  • Component Type: Two-component
  • Color: Off-White
  • Form: Paste
  • Container Size: 10.1 Ounce
  • Container Type: Cartridge
  • Work Time: 50 Minutes at 70 Degrees Fahrenheit
  • Clamp Time: 5 Hours at 70 Degrees Fahrenheit
  • Paint Time: 4 Hours at 70 Degrees Fahrenheit
  • Cure Time: 24 Hours at 70 Degrees Fahrenheit
  • Compatible Materials: SMC, fiberglass, carbon fiber, plastics, and primed metal
  • Application: Plastic body panels, spoilers, and ground effects
  • Quantity: 1 Cartridge
• The LORD Fusor 127EZ Slow Plastic Bonding Adhesive can also be referred to as Fusor plastic bonding adhesive, slow structural adhesive, two-component urethane adhesive, plastic panel bonding adhesive, and non-sag body panel adhesive.

Parker LORD is a Parker Hannifin business that develops adhesives, coatings, thermal management materials, and motion control technologies for transportation, industrial, aerospace, and electronics markets.

Q: What surfaces can LORD Fusor 127EZ bond?
A: LORD Fusor 127EZ bonds SMC, fiberglass, carbon fiber, plastics, and primed metal.

Q: What are the clamp, paint, and cure times for LORD Fusor 127EZ?
A: Clamp time is 5 hours, paint time is 4 hours, and cure time is 24 hours at 70 degrees Fahrenheit.

Q: Can LORD Fusor 127EZ be used as a seam sealer or filler?
A: No. LORD Fusor 127EZ is not for use as a seam sealer or filler.