Mastercool 67010 Recovery Cylinder, 30-lb, Float Switch 1/2-inch Acme

Mastercool 67010 Recovery Cylinder, 30-lb, Float Switch 1/2-inch Acme

• The Mastercool 67010 is a 30-lb DOT-approved refrigerant recovery cylinder with a built-in float switch for automatic shut-off at 80 percent fill; it has 1/2 inch ACME fittings and is designed for safe capture, storage and transport of recovered refrigerant gases.
• Features:
  • Float switch shut-off device in 3/4 inch NPT opening stops filling when liquid level reaches approximately 80 percent, preventing overfill.
  • Y-valve arrangement with separate liquid and vapor ports for controlled flow during recovery, enhancing efficiency and safety.
  • HP295 steel body with powder-coated blue finish for corrosion resistance and durability in shop environments.
  • Certified to DOT-4BA400 standard, and meets ARI, AUS, and Canadian TC (Transport Canada) approval for refrigerant transport and storage.
• Specifications:
  • Manufacturer: Mastercool
  • Part Number: 67010
  • Nominal Cylinder Capacity: 30 lb of refrigerant (empty cylinder)
  • Water Capacity: ? 26.2 lb / 11.9 L
  • Dimensions (Width x Height): 9.125 inch x 17.52 inch
  • Connection: 1/2 inch ACME fittings, plus 3/4-inch NPT opening for float switch device.
  • Service Pressure: 400 PSI; Relief Valve Pressure: 600 PSI; Tank Test Pressure: 800 PSI; Air Tightness Test Pressure: 400 PSI
  • Body Material: HP295 steel
  • Standards / Certification: DOT-4BA400; complies with CAN/CSA-B339-02; ARI and AUS approvals.
  • System Compatibility : Designed for use with all types of refrigerants (CFC, HCFC, HFC and blends, including R-134a); used in refrigerant recovery systems to store & transport recovered gases safely; intended for automotive and HVAC/R professional shops.
• The Mastercool 67010 also known as Mastercool 67010 recovery cylinder with float, Mastercool 30 lb DOT tank (float switch) blue, Mastercool HP295 steel refrigerant recovery cylinder ACME ½-inch, and Mastercool blue 30-lb recovery tank float switch 67010

Mastercool is a family-owned manufacturer of professional HVAC/R and automotive A/C service tools and equipment, including manifolds, gauges, vacuum pumps, recovery units, leak detectors, and fittings.

Q: What is the float switch for?
A: The float switch installed in the 3/4 inch NPT opening monitors liquid level inside the cylinder, and shuts off the fill when refrigerant liquid reaches approximately 80 percent of cylinder capacity, preventing overfill and reducing safety risks.

Q: Is this cylinder safe to transport in vehicles? What approvals does it have?
A: Yes, it is DOT-approved under Class 4BA400, meets ARI, AUS, and Transport Canada (TC) standards, and is certified for safe transport and storage of recovered refrigerants.

Q: Can I use this tank with dry nitrogen instead of refrigerant recovery?
A: No, Mastercool specifies "Not for use with nitrogen" for this particular model. Using with gases outside its intended application may violate safety or regulatory guidelines.