Northstar SX01Q Solvent-Based Adhesion Promoter, Clear Liquid, 540 g/L VOC, 1 Quart Can

Northstar SX01Q Solvent-Based Adhesion Promoter, Clear Liquid, 540 g/L VOC, 1 Quart Can

• Northstar SX01Q is a solvent-based adhesion promoter from Lusid Technologies for automotive refinish substrate preparation. SX01 comes ready to spray and is applied before topcoat to promote coating adhesion on compatible refinish surfaces.
• Features:
  • Ready-to-spray formula requires no mixing before application.
  • Compatible substrates include plastics, aluminum, stainless steel, non-ferris metal, fiberglass, and E-Coat.
  • Properly prepared bumper covers of all chemical makeup are included in the application range.
  • Apply one very light mist coat over the substrate and topcoat within one hour.
  • Heavy or multiple coats can cause wrinkling when applying basecoat.
• Specifications:
  • Manufacturer: Lusid Technologies Inc.
  • Part Number: SX01Q
  • UPC: 852689215233
  • Brand: Northstar
  • Product Name: SX01 STIXX Adhesion Promoter
  • Product Type: Solvent-based adhesion promoter
  • Container Size: 1 Quart
  • Container Type: Can
  • Form: Liquid
  • Color: Clear
  • Mixing Ratio: Ready to spray
  • Solids Weight as Mixed: 16 Percent
  • VOC as Mixed: 4.5 lb/gal
  • VOC Content: 540 g/L
  • Pot Life at 77 Degrees Fahrenheit: Not applicable
  • Flash Time: 5 to 10 Minutes at 77 Degrees Fahrenheit
  • Topcoat Time: 10 to 30 Minutes at 77 Degrees Fahrenheit
  • Sand Time: Not recommended
  • Force Dry: Not recommended
  • Gun Setup: 1.4 to 1.6 Millimeter gravity feed or siphon feed
  • Application: Apply one very light mist coat over substrate to be painted
  • Rubberized: Without Rubberized
  • California Pro65 Warning: Cancer and Reproductive Harm
  • Packaging Type: Each
  • Quantity: 1 can
• The Solvent-Based Adhesion Promoter can also be referred to as automotive adhesion promoter, plastic adhesion promoter, bumper adhesion promoter, clear adhesion promoter, and Northstar adhesion promoter.

Lusid Technologies Inc. operates from Kearns, Utah and supplies automotive refinish coating systems under the Northstar, GenTec, and GreenTec brands for collision repair and body shop applications.

Q: Does SX01Q need to be mixed before application?
A: No. SX01 comes ready to spray.

Q: Which substrates are specified for SX01?
A: SX01 is specified for plastics, aluminum, stainless steel, non-ferris metal, fiberglass, E-Coat, and properly prepared bumper covers.

Q: How soon should SX01 be topcoated?
A: Topcoat after 10 to 30 minutes at 77 Degrees Fahrenheit and within one hour after application.