USC DURAGLAS 24030 Short Strand Fiberglass Auto Body Filler, Dark Green, Solid, Short Strand, 1 Gallon

USC DURAGLAS 24030 Short Strand Fiberglass Auto Body Filler, Dark Green, Solid, Short Strand, 1 Gallon

• DURAGLAS Fiberglass Filler is the original fiberglass reinforced automotive body repair filler. Formulated with short-strand fiberglass fibers, DURAGLAS provides ultimate strength and durability on rust-outs, holes, tears and cracks. DURAGLAS is ideal for use on metal and fiberglass panels and is 100% waterproof.
• Features
  • Reinforced for Superior Strength: Due to the short strand fiberglass fibers mixed into the filler, it offers superior strength and durability compared to standard body fillers. This makes it ideal for larger repairs, holes, cracks, and tears where additional reinforcement is needed.
  • Rust and Waterproof: The USC DURAGLAS 24030 is formulated to be both rust-proof and waterproof. This is a key feature, especially for auto body repairs where the filled area will be exposed to the elements.
  • Compatible with Fiberglass and Metal: This fiberglass filler can be used on both metal and fiberglass surfaces. This versatility allows for repairs on various parts of a car or other applications where both materials might be present.
• Specifications
  • Part No.: 24030
  • Product Line: USC
  • MFR Model: 24030
  • Applications: For rust, automotive and marine industries
  • Manufacturer: US Chemical & Plastics
  • Trade Mark: DURAGLAS
  • UPC: 037307240303
  • Brand: USC
  • Color: Dark Green
  • Mixing Ratio: 50:1
  • Type: Short Strand
  • Container Size (gal): 1
  • Form: Solid
  • Container Type: Can
• Product Uses:
  • Rust repairs, repair cracks and holes in fiberglass, use on weld areas and bond seams for automotive and marine
• Applications (for larger holes, cracks and dents):
  • Apply only on properly prepared surfaces. Before filling, the surface must be a minimum temperature of 65º F
  • Coat one side of fiberglass cloth or screen generously with mixture and place over hole, wet side against repair. Flatten and smooth around edges using spreader to squeegee any air bubbles and to assure adhesion
  • Gently press the center of cloth/screen to create a slight dip, leaving room for the next coat(s) of mixture. Allow ample time to cure (10-15 minutes)
  • Mix additional filler and apply to repaired area, building up to the original contour
• Finishing:
  • ​​​​​​​When material has hardened (approximately 15-20 minutes), sand, then featheredge repaired area to desired contour