Overview
Polyvance 6012 Replacement Element Assembly, use with Airless Plastic Welder
Polyvance 6012 Replacement Element Assembly, use with Airless Plastic Welder
- This is the replacement element for the Mini-Weld model 7 airless plastic welder. The previous design had a Ni-Chrome wire that, like a light bulb, would seem to burn out at the most inopportune time. This design, however, has a ceramic element that lasts way longer. In fact, we put this element on our cycle-tester to see how long it would last. The cycle tester would turn on the element for 30 min, then turn off the element for 30 min. This cycle happened 24 times a day for 9 months (a total of 6500 cycles) and the element never burned out. Here is another great thing about this element. In the unlikely event that the ceramic core burns out, you can replace just the ceramic core. Of course, what is more likely to happen is that the ceramic element will break if you happen to drop the element assembly.
- Features
- Polyvance wanted an element that would last a long time, so they designed it with a ceramic element
- Polyvance wanted an element that had a Replacement heater so that you don't have to buy the entire assembly if the heater breaks or burns out
- Polyvance wanted an element that gets hot quickly and has enough power to keep the element hot, so we made it 200 watts
- This has WAY more power than most off-the-shelf elements
- Most off-the-shelf elements are typically in the 40 Watt to 80 Watt range
- Specifications
- Used On Item: Airless Plastic Welder
- Used On Model/Brand: Mini-Weld 7
- Power Rating: 200 Watts
- Voltage Rating: 120 Volts
- UPC: 694687004293