POR-15 45901 Top Coat Paint, Direct to Metal, Chassis Black, 1 gallon

POR-15 45901 Top Coat Paint, Direct to Metal, Chassis Black, 1 gallon

• POR-15 45901 is a Top Coat direct to metal paint in Chassis Black for long term sheen and color retention on properly prepared metal or roughened painted surfaces. It forms a durable, UV resistant barrier for automotive and industrial applications. This is a standalone coating, not a replacement part for any SKU.
• Features:
  • Direct to metal formula applies to properly prepped bare metal or roughened painted surfaces to simplify finishing steps
  • UV and scratch resistant film helps maintain color and sheen during prolonged outdoor exposure
  • Moisture repelling barrier aids corrosion resistance on frames, chassis, and equipment
  • Approximate coverage per gallon at a typical build is suitable for large areas, reducing refills and downtime
  • Universal coating for metal substrates; not a vehicle specific replacement part
• Specifications:
  • Manufacturer: POR-15
  • Part Number: 45901
  • Product Type: single stage direct to metal top coat paint
  • Color / Finish: Chassis Black, semi gloss appearance
  • Volume: 1 gallon
  • Recommended Use: apply to properly prepared bare metal or over roughened painted surfaces
  • Coverage Guidance: about 240 sq ft per gallon at approximately 3 mil wet film (actual results vary with surface and method)
  • System Compatibility or Application: top coat for automotive and industrial metal surfaces; can be used over POR-15 Rust Preventive Coating or on properly prepped bare metal; not a replacement part
  • Packaging Type: metal can
• The POR-15 Top Coat can also be referred to as DTM top coat, chassis black paint, automotive metal topcoat, direct to metal semi gloss, and rust resistant top coat.

POR-15 formulates protective coatings for automotive and industrial metal surfaces, focusing on direct to metal top coats and rust preventive systems with published specifications for dependable field performance.

Q: Do I need a primer before applying this top coat?
A: No primer is required on properly prepared bare metal; it can also be applied over roughened painted surfaces. Follow the manufacturer surface prep guidance for best adhesion.

Q: What coverage should I expect from 1 gallon?
A: As a planning guide, about 240 sq ft per gallon at roughly 3 mil wet film. Coverage varies with surface profile, color, and application method.

Q: Can I use this over POR-15 Rust Preventive Coating?
A: Yes. It can be used as a top coat over POR-15 Rust Preventive Coating after proper preparation, or applied directly to properly prepared bare metal.