POR-15 46801 Top Coat Paint, Direct to Metal, Gloss White, 1 gallon

POR-15 46801 Top Coat Paint, Direct to Metal, Gloss White, 1 gallon

• POR-15 46801 is a Top Coat direct to metal paint in Gloss White, 1 gallon. It delivers long term sheen and color retention on properly prepared metal or roughened painted surfaces and can be used as a standalone DTM coating or over POR-15 Rust Preventive Coating. This is a standalone coating, not a replacement part.
• Features:
  • Direct to metal application on properly prepared substrates to eliminate a separate primer step and streamline finishing
  • UV and scratch resistant film maintains color and sheen during prolonged outdoor exposure for lasting appearance
  • Moisture shedding barrier helps resist corrosion on frames, chassis, and equipment to extend service life
  • Liquid coverage about 240 sq ft per gallon at approximately 3 mil wet film to aid job planning and material estimates
  • Usable as a standalone DTM top coat or over POR-15 Rust Preventive Coating for UV stable color; not a vehicle specific replacement part
• Specifications:
  • Manufacturer: POR-15
  • Part Number: 46801
  • Product Type: direct to metal single stage top coat paint
  • Color / Finish: Gloss White
  • Volume: 1 gallon (128 fl oz)
  • COVERAGE: approximately 240 sq ft per gallon at about 3 mil wet film
  • Thinning: up to 10 percent with POR-15 Reducer if needed
  • Application Methods: roller or spray per technical data guidance
  • Dry Time: cures to touch in 30 to 60 minutes; second coat in 2 to 72 hours depending on conditions
  • System Compatibility or Application: top coat for automotive and industrial metal surfaces; apply direct to metal or over POR-15 Rust Preventive Coating; not a replacement part
  • Packaging Type: metal can
• The Top Coat Paint can also be referred to as direct to metal paint, DTM top coat, gloss white chassis paint, automotive metal topcoat, and POR 15 top coat.

POR-15 formulates protective coatings for automotive and industrial metal surfaces, focusing on direct to metal top coats and rust preventive systems with documented specifications to support reliable field performance.

Q: Do I need a primer before applying this top coat?
A: No primer is required on properly prepared bare metal; it can also be applied over roughened painted surfaces or over POR-15 Rust Preventive Coating as directed by the manufacturer.

Q: What coverage should I plan for with 1 gallon?
A: Plan for about 240 sq ft per gallon at roughly 3 mil wet film. Actual coverage varies with surface profile, color, and application method.

Q: Can I spray this product and how should I thin it?
A: Yes. Follow the technical data guidance; if thinning is needed, use POR-15 Reducer up to 10 percent. Observe recommended recoat windows and cure times.