SEM 85173 Color Coat 3 Camel, Flexible Coating for Leather, Vinyl, Plastic, Carpet and Velour, Satin Finish, 16 Ounce Aerosol

• Camel is one of the tans in the Color Coat 3 line, sprayed onto worn or faded interior surfaces to bring the color back or change it outright. Trim shops and refinishers use it on seats, dash pads, door panels and properly prepped bare metal.
• Features:
  • On carpet and velour it is for enhancing the original color rather than changing it, and a light hand keeps the texture of the fibers
  • ABS and PVC take a coat of Sand Free Adhesion Promoter first, with the color going on while the promoter is still wet; TPO, PP and EPDM take XXX Adhesion Promoter or Plastic Adhesion Promoter
  • One can covers about 10 square feet and cures in 24 hours at 70 degrees Fahrenheit
  • When a high plasticizer vinyl bleeds through and leaves the surface tacky, Tac Free over the affected area clears it
• Specifications:
  • Manufacturer: SEM Products
  • Part Number: 85173
  • UPC: 646786851735
  • Color: Camel
  • Finish: Satin
  • Size: 16 Ounce Aerosol
  • Coverage: About 10 square feet per can
  • Cure Time: 24 hours at 70 degrees Fahrenheit
  • Shelf Life: 5 years
  • Replaces: SEM 15173 Camel Color Coat Aerosol
  • Compatible Systems: Color Coat 3 clears for setting the sheen
• The SEM Color Coat 3 Camel Aerosol can also be referred to as SEM 85173, Color Coat 3 Camel, tan vinyl and leather spray paint, automotive interior trim paint, and flexible plastic coating aerosol.

SEM Products is a Rock Hill, South Carolina manufacturer of coatings, adhesives, primers and repair materials for the automotive refinish trade. Its range also serves the marine, commercial fleet, aerospace, and upholstery and trim markets.

Q: What part number did this replace?
A: SEM 15173, the Camel Color Coat aerosol.

Q: How is it sprayed?
A: From 6"" to 8"" away in 2 to 3 coats, with 5 to 10 minutes between them. Shake the can a full minute after the mixing ball starts to rattle.

Q: Can the sheen be changed?
A: Yes. The Color Coat 3 clears come in high gloss, satin gloss and low luster, sprayed over the color to set the level.