LORD Fusor 123EZ Medium Non-Sag Seam Sealer, Blue, 10.1 Ounce Cartridge, 24 Hour Cure

LORD Fusor 123EZ Medium Non-Sag Seam Sealer, Blue, 10.1 Ounce Cartridge, 24 Hour Cure

• LORD Fusor 123EZ is a two-component epoxy-based seam sealer for automotive collision repair. It duplicates factory appearance on truck bed, tooled door skin, floor pan, and core support seams where a non-sag cosmetic seam is required.
• Features:
  • Direct application to bare metal or primed surfaces.
  • Bonds bare metal, epoxy two-component primed surfaces, and urethane two-component primed surfaces.
  • Flexible seal has no shrinkage, cracking, or sagging after application.
  • Tooling window is within 10 minutes after sealer application.
  • Acid-etch primers are not recommended under this sealer.
• Specifications:
  • Manufacturer: LORD Fusor Adhesives
  • Part Number: 123EZ
  • Product Type: Medium non-sag seam sealer
  • Base Chemistry: Epoxy
  • Component Type: Two-component
  • Color: Blue
  • Form: Paste
  • Container Size: 10.1 Ounce
  • Container Type: Cartridge
  • Work Time: 10 Minutes at 70 Degrees Fahrenheit
  • Sand Time: 30 Minutes at 70 Degrees Fahrenheit
  • Paint Time: 30 Minutes at 70 Degrees Fahrenheit
  • Cure Time: 24 Hours at 70 Degrees Fahrenheit
  • Application: Truck bed seams, tooled door skin seams, floor pan seams, and core support seams
  • Compatible Surfaces: Bare metal, epoxy two-component primed surfaces, and urethane two-component primed surfaces
  • Quantity: 1 Cartridge
• The LORD Fusor 123EZ Medium Non-Sag Seam Sealer can also be referred to as Fusor non-sag seam sealer, medium seam sealer, epoxy seam sealer, automotive body seam sealer, and factory appearance seam sealer.

Parker LORD is a Parker Hannifin business that develops adhesives, coatings, thermal management materials, and motion control technologies for transportation, industrial, aerospace, and electronics markets.

Q: Which seams is LORD Fusor 123EZ used on?
A: LORD Fusor 123EZ is used on truck bed seams, tooled door skin seams, floor pan seams, and core support seams.

Q: What surfaces can LORD Fusor 123EZ be applied to?
A: It can be applied directly to bare metal or primed surfaces, including epoxy and urethane two-component primed surfaces.

Q: How soon can LORD Fusor 123EZ be sanded or painted?
A: LORD Fusor 123EZ can be sanded or painted in 30 minutes at 70 degrees Fahrenheit.