LORD Fusor T23 Medium Truck Plastic Bonding Adhesive, Beige Paste, 10.1 Ounce Cartridge

LORD Fusor T23 Medium Truck Plastic Bonding Adhesive, Beige Paste, 10.1 Ounce Cartridge

• LORD Fusor T23 is a two-component urethane adhesive for installing truck plastic and composite body panels. It bonds scuff liners to composite, wood, or primed surfaces and composite body panels to primed metal surfaces.
• Features:
  • High-strength urethane chemistry for structural body panel installation.
  • Non-sag formula remains in position on vertical and overhead surfaces.
  • Resists sunlight, weathering, humidity, and salt spray.
  • Work time is 20 minutes at 70 degrees Fahrenheit, with a 3 hour clamp time at 70 degrees Fahrenheit.
  • Does not contain ozone depleting chemicals.
• Specifications:
  • Manufacturer: LORD Fusor Adhesives
  • Part Number: T23
  • UPC: 808498100338
  • Product Type: Medium truck plastic bonding adhesive
  • Base Chemistry: Urethane
  • Component Type: Two-component
  • Color: Beige
  • Form: Paste
  • Container Size: 10.1 Ounce
  • Container Type: Cartridge
  • Work Time: 20 Minutes at 70 Degrees Fahrenheit
  • Clamp Time: 3 Hours at 70 Degrees Fahrenheit or 22 Minutes at 140 Degrees Fahrenheit
  • Cure Time: 24 Hours at 70 Degrees Fahrenheit or 60 Minutes at 140 Degrees Fahrenheit
  • Application: Hood panels, roof panels, fenders, fender liners, fairings, spoilers, wind deflectors, cab extenders, ground effects, headlamp buckets, and other body panels
  • Compatible Materials: SMC, fiberglass, carbon fiber, other plastics, composite body panels, wood, and primed metal
  • Quantity: 1 Cartridge
• The LORD Fusor T23 Medium Truck Plastic Bonding Adhesive can also be referred to as Fusor truck plastic adhesive, medium truck plastic bonding adhesive, two-component urethane adhesive, truck body panel adhesive, and composite body panel installation adhesive.

Parker LORD is a Parker Hannifin business that develops adhesives, coatings, thermal management materials, and motion control technologies for transportation, industrial, aerospace, and electronics markets.

Q: Which panels is LORD Fusor T23 used to install?
A: LORD Fusor T23 is used to install hood panels, roof panels, fenders, fender liners, fairings, spoilers, wind deflectors, cab extenders, ground effects, headlamp buckets, and other body panels.

Q: Which substrates are compatible with LORD Fusor T23?
A: Compatible substrates include SMC, fiberglass, carbon fiber, other plastics, composite body panels, wood, and primed metal.

Q: What are the work, clamp, and cure times for LORD Fusor T23?
A: Work time is 20 minutes, clamp time is 3 hours, and cure time is 24 hours at 70 degrees Fahrenheit.