3M Stikit Sanding Block 45204, 3-1/4", PSA Attachment

3M Stikit Sanding Block 45204, 3-1/4", PSA Attachment

• The 3M Stikit Sanding Block 45204 makes everyday sanding jobs easier by distributing pressure evenly for more control. It doubles as an abrasive dispenser: Stikit abrasive adheres to the backup pad, feeds from a roll, and shears off when used, so none of the abrasive roll goes to waste.
• Features:
  • Distributes pressure evenly, allowing more control than sanding by hand.
  • Comfortable to grip, allowing more pressure to be applied without distortion.
  • Sand corners with the flat end; sand contours with the rounded end.
  • Built to dispense sandpaper in a variety of grits from a loaded Stikit refill roll.
  • Holds sandpaper securely in place; cushioned backing lets the abrasive work as intended.
  • When abrasive is worn, lift it, pull more from the feed roll, stick it down, and shear off the used paper.
  • Suitable for abrading flat surfaces (wood, plaster, wallboard, metal) and preparing new or previously painted surfaces.
• Application Notes:
  • This block is used with a Stikit abrasive refill roll (sold separately), not pre-cut individual sheets; it dispenses and feeds abrasive directly from the roll.
  • For industrial/occupational use only; not intended for consumer sale or use.
• Compatible Applications:
  • Wood, Plaster, Wallboard, and Metal Sanding
  • New and Previously Painted Surface Preparation
  • Chamfering Sharp Edges and Defining Intricate Angles
• Specifications:
  • Manufacturer: 3M
  • Part Number: 45204
  • 3M ID: 7000045660
  • Product Line: Stikit
  • Product Type: Sanding Block
  • For Sheet Width: 3.25" (82.55mm)
  • Sanding Type: Dry
  • Vacuum Support: No
  • Attachment Type: PSA (Stikit)
  • Quantity: 6 per Case
  • UPC: 00051144452040
• This item is also often referred to as a Stikit sanding block, PSA sanding block, 3-1/4 inch sanding block, sandpaper dispenser block, and 3M 45204 block.

3M manufactures abrasives, compounds, coatings, and related surface preparation products for automotive refinishing and collision repair.

Q: What width sandpaper does the 3M 45204 block use?
A: This block is sized for 3.25" wide abrasive, fed from a Stikit refill roll.

Q: How is abrasive loaded onto this block?
A: Stikit abrasive adheres to the backup pad and feeds directly from a roll; lift the worn abrasive, pull more from the roll, stick it down, and shear off the used portion.

Q: What surfaces can this block be used on?
A: It can be used to abrade wood, plaster, wallboard, and metal, as well as prepare new or previously painted surfaces.

Q: How many blocks come in a case?
A: Each case contains 6 blocks.