Polyvance 2510 PlastiFix High Performance Adhesive, 200 mL dual-cartridge

Polyvance 2510 PlastiFix High Performance Adhesive, 200 mL dual-cartridge

• The Polyvance 2510 PlastiFix High Performance Adhesive is a two-component, fully reactive structural methacrylate adhesive used for bonding metals, plastics, and composite substrates with excellent strength and durability.
• Features:
  • 1:1 mix ratio with sag-resistant, thixotropic formula for vertical surfaces
  • Strong adhesion to metals (aluminum, stainless, plated steel) without primer
  • High impact, peel, and shear resistance after cure
  • Room temperature cure with 10–12 minute working time and full cure in 24 hours
  • Gap filling capability ≥ 0.125 inch; cured Shore D hardness ~66
• Includes:
  • Dual cartridge (200 mL total) with Pre-measured Parts A and B
  • Two static mixer tips
• Specifications:
  • Manufacturer: Polyvance
  • Part Number: 2510
  • Volume: 200 mL
  • Mix Ratio: 1:1 by weight and volume
  • Working Time: 10–12 minutes at 25 °C
  • Fixture Time: 18–22 minutes
  • Full Cure: 24 hours
  • Shore Hardness (cured): 66 D
  • Tensile Shear Strength (Steel/Steel): 4,200 psi
  • Service Temperature Range: –40 °F to 250 °F
  • Gap Fill: ≥ 0.125 inch
  • Application: Structural bonding of metals, thermoplastics, thermosets, composites
• The Polyvance 2510 PlastiFix High Performance Adhesive can also be referred to as PlastiFix 2510 methacrylate adhesive, Polyvance 2510 structural adhesive, PlastiFix high performance adhesive, 2510 structural bonding adhesive, and PlastiFix 2510 dual cartridge adhesive.

Polyvance offers the PlastiFix 2510 adhesive system engineered for high strength structural bonding in plastic repair, combining durability, gap fill capacity, and ease of use in demanding applications.

Q: What materials can 2510 bond?
A: It bonds metals, thermoplastics, thermosets, fiberglass, ABS, PVC, epoxy, composites, and many plastic/metal combinations. (From Polyvance technical data sheet)

Q: How long is the working time?
A: Approximately 10–12 minutes at 25 °C (77 °F) before the mixture begins to set.

Q: Does 2510 require primer on metal?
A: No. It adheres well to aluminum, stainless steel, and plated steels without primer or chemical wipes.