USC Garage Flexible Glaze 77704, Polyester Bumper Repair Filler, 8 oz. Pouch

USC Garage Flexible Glaze 77704, Polyester Bumper Repair Filler, 8 oz. Pouch

• USC Garage Flexible Glaze is a super flexible, polyester, self-leveling glaze formulated for use on flexible and rigid bumpers, plastic, and fiberglass parts on vehicles and motorcycles. Its smooth flowing consistency is suited for blending and self-levels to an easy-to-sand finish, making it ideal as a final coat over body filler on properly prepped surfaces up to 1/8" thick.
• Features:
  • Super flexible, self-leveling polyester glaze formula.
  • Ideal for minor body work and surface imperfections 1/8" thick or less, such as sand scratches, chips, and pinholes.
  • Self-levels to an easy-to-sand finish, well suited for blending.
  • Can be used as a finish coat over body filler or on properly prepped metal surfaces.
  • May be intermixed with any USC body filler product except All-Metal.
  • May be topcoated with polyester, 2K urethane, or 1K primer.
• Application Notes:
  • Bring glaze and hardener to room temperature (minimum 68°F) before use.
  • Mix hardener at 2% by weight (50:1 ratio); approximate setting time at 75°F is 3-5 minutes.
  • Do not return unused mixture to the pouch, as it will harden remaining contents.
  • Do not apply over fresh or uncured coatings.
  • When hardened (approximately 15 minutes), sand with 100-180 grit, followed by 220-400 grit if desired.
• Compatible Substrates:
  • Metal
  • Aluminum
  • Fiberglass
  • Aged, Sanded OEM Topcoats
  • Galvanized and Other Zinc-Coated Steel
  • Flexible Plastics (Bumpers, Ground Effects, Front Fascia)
  • SMC (Cosmetic Repairs Only)
  • Wood
  • 2K Primers
  • Body Filler
• Specifications:
  • Manufacturer: U.S. Chemical & Plastics (USC)
  • Part Number: 77704
  • Product Line: Garage
  • Product Type: Flexible Glaze, Polyester Bumper Repair Filler
  • Container Size: 8 oz. Pouch
  • Appearance: Off-White
  • VOC (Packaged): 281 g/l
  • VOC (Applied): 2.2 g/l
  • Weight Per Gallon: 0.59 lbs. (Average)
  • Viscosity @ 77°F: 18,000 cps
  • Maximum Recommended Thickness (Sanded): 1/8"
  • Gel Time @ 77°F: 4-5 Minutes
  • Sanding Time @ 77°F: 15 Minutes
  • Maximum Heat: 200°F for 30 Minutes
  • Catalyst Required: Benzoyl Peroxide
  • Catalyzation Ratio: 2% by Weight (50:1)
  • Exotherm Temperature: 205°F
  • Tack Free Time: 15-20 Minutes
• This item is also often referred to as a flexible glaze filler, polyester bumper filler, self-leveling glaze putty, flexible plastic repair filler, and USC Garage Flexible Glaze.

U.S. Chemical & Plastics (USC) manufactures body fillers, glazes, primers, and related automotive collision repair products.

Q: What surfaces can USC Flexible Glaze be used on?
A: It can be used on flexible and rigid bumpers, plastic, fiberglass, metal, aluminum, and other properly prepped surfaces.

Q: How is this product mixed?
A: Hardener is mixed at 2% by weight (a 50:1 ratio) with the glaze, using a plastic spreader in a folding motion until a uniform color is achieved.

Q: What is the maximum recommended application thickness?
A: The maximum recommended thickness when sanded is 1/8".

Q: Can unused mixed product be returned to the pouch?
A: No, unused mixture should not be returned to the pouch, as it will harden the remaining contents.