House of Kolor AP01-Q01 ADHERETO Adhesion Promoter, 1 Quart Can, Clear Liquid

House of Kolor AP01-Q01 ADHERETO Adhesion Promoter, 1 Quart Can, Clear Liquid

• House of Kolor AP01-Q01 ADHERETO is a clear adhesion promoter that creates a bond between a substrate and a coating before topcoat application. It is a ready-to-spray automotive refinish product for plastics and other approved substrates.
• Features:
  • Ready-to-spray formula requires no reduction before application.
  • Apply before topcoats to bond automotive paint to plastics.
  • In National Rule areas, AP01 may also be used on brass, aluminum, metal, and chrome.
  • Topcoats must be applied within 2 to 3 minutes after the Adhereto coat dries and not more than 5 minutes at 70 Degrees Fahrenheit.
  • If the Adhereto coat completely dries, reapply before topcoating.
• Specifications:
  • Manufacturer: House of Kolor
  • Part Number: AP01-Q01
  • MPN: AP01.Q01
  • UPC: 806298356122
  • Product Type: Adhesion promoter
  • Size: 1 Quart
  • Container Type: Can
  • Color: Clear
  • Form: Liquid
  • Application Method: Ready-to-spray
  • Reduction: No reduction required
  • Category: Specialty coating and adhesion promoter
  • Actual VOC: 0.70 Pound per Gallon Maximum; 85 Gram per Liter Maximum
  • Regulatory VOC: 4.5 Pound per Gallon Maximum; 540 Gram per Liter Maximum
  • Compatible Substrates: Plastics; brass, aluminum, metal, and chrome in National Rule areas
  • Quantity: 1 Each
• The ADHERETO Adhesion Promoter can also be referred to as adhesion promoter, clear adhesion promoter, automotive adhesion promoter, adhesive primer, and ready-to-spray adhesion promoter.

House of Kolor is a custom automotive paint brand founded in 1956. The brand supplies custom refinish coatings, color systems, primers, clears, and specialty paint materials for professional painters and custom builders.

Q: Does AP01-Q01 need reducer before spraying?
A: No. AP01-Q01 is ready to spray and requires no reduction.

Q: Which substrates are listed for AP01-Q01?
A: AP01 is used on plastics, and in National Rule areas it may also be used on brass, aluminum, metal, and chrome.

Q: How soon should topcoat be applied over ADHERETO?
A: Topcoats must be applied within 2 to 3 minutes after the coat dries and not more than 5 minutes at 70 Degrees Fahrenheit.