House of Kolor AP01-Q01 Adhereto Adhesion Promoter, Clear, 1 Quart Can

House of Kolor AP01-Q01 Adhereto Adhesion Promoter, Clear, 1 Quart Can

• House of Kolor AP01-Q01 Adhereto is an adhesion promoter applied before topcoats to create a bond between substrates and coatings in automotive paint work. It is used on plastics and, in National Rule areas, on brass, aluminum, metal, or chrome.
• Features:
  • Ready-to-spray formula requires no reduction before application.
  • For top coating polypropylene, TPO, polypropylene/elastomer blends, other plastics, aluminum, steel, brass, and other metals.
  • Apply as one medium mist coat before topcoat.
  • Topcoats must be applied immediately after the Adhereto coat dries, usually within 2 to 3 minutes and not more than 5 minutes at 70 F.
  • In Low VOC jurisdictions, compliant only for use on plastic surfaces.
• Specifications:
  • Manufacturer: House of Kolor
  • Part Number: AP01-Q01
  • UPC: 806298356122
  • Product Type: Adhesion promoter
  • Product Line: Adhereto Adhesion Promoter
  • Color: Clear
  • Container Size: 1 quart
  • Container Type: Can
  • Form: Liquid
  • Mixing Ratio: Ready-to-spray
  • Category: Specialty Coating / Adhesion Promoter
  • Actual VOC: 0.70 max pounds per gallon / 85 max grams per liter
  • Regulatory VOC: 4.5 max pounds per gallon / 540 max grams per liter
  • Density: 7-9 pounds per gallon / 840-1080 grams per liter
  • Application: Automotive paint adhesion to plastics
  • National Rule Areas: May also be used on brass, aluminum, metal, or chrome
• The Adhereto Adhesion Promoter can also be referred to as plastic adhesion promoter, automotive adhesion promoter, clear adhesion promoter, ready-to-spray adhesion promoter, and specialty coating adhesion promoter.

House of Kolor is a custom automotive paint brand founded in 1956 by Jon Kosmoski. The brand produces custom paint and specialty coating products for automotive painters, builders, and custom refinish projects.

Q: Does AP01-Q01 require reducer before spraying?
A: No. It is ready to spray out of the can with no reduction required.

Q: How soon should topcoat be applied after Adhereto dries?
A: Apply topcoats immediately after it dries, usually within 2 to 3 minutes and not more than 5 minutes at 70 F.

Q: What surface preparation is specified before applying AP01?
A: Clean contamination such as dirt, oil, grease, and mold release agents with isopropyl alcohol or KC20 Post Sanding Cleaner, dry thoroughly, and scuff with a maroon scuff pad.