Binks 98-2650 Model 2100 Conventional Siphon Spray Gun Outfit, 0.070 inch Fluid Tip, 1 Quart Drip Proof Cup

Binks 98-2650 Model 2100 Conventional Siphon Spray Gun Outfit, 0.070 inch Fluid Tip, 1 Quart Drip Proof Cup

• Binks 98-2650 is a conventional siphon feed spray gun outfit built around the Model 2100 gun with a 1 quart drip proof cup. It is designed to spray a wide range of conventional coatings, including high solids and waterborne materials, with steady atomization for shop and industrial finishing.
• Features:
  • Conventional siphon feed Model 2100 gun supports low to medium viscosity coatings for automotive and industrial finishing use.
  • 0.070 inch (1.8 mm) nozzle setup provides reliable flow for primers, enamels, and other general purpose coatings.
  • Stainless steel fluid passages resist corrosion and support waterborne materials.
  • Maximum Delivery air nozzle design improves atomization and finish quality with conventional air supply.
  • Includes a drip proof 1 quart siphon cup to reduce mess and improve material handling during spraying.
• Includes:
  • Model 2100 conventional spray gun (2101-4307-9)
  • 1 quart drip proof siphon cup (81-800)
• Specifications:
  • Manufacturer: Binks
  • Part Number: 98-2650
  • Feed type: Siphon
  • Spray technology: Conventional
  • Fluid nozzle size: 0.070 inch (1.8 mm)
  • Pattern size: 10-1/2 inches
  • Cup capacity: 1 quart
  • Air consumption: 12.1 cfm at 50 psi
  • Fluid passages: Stainless steel
  • Gun body construction: Drop forged aluminum
  • Air inlet: 1/4 inch NPS male
  • Fluid inlet: 3/8 inch NPS male
  • System compatibility or application: Conventional siphon spray gun outfit for industrial and automotive finishing, suitable for conventional coatings including high solids and waterborne materials.
• The Binks Model 2100 Conventional Siphon Spray Gun Outfit can also be referred to as a conventional siphon spray gun, paint spray gun with cup, Model 2100 spray gun outfit, general purpose refinish spray gun, and 1 quart siphon feed spray gun.

Binks manufactures professional spray finishing equipment including conventional and HVLP spray guns, pressure feed systems, and fluid handling components used in automotive refinish, industrial coating, and general finishing operations.

Q: What materials can this spray gun outfit handle?
A: It is intended for conventional coatings such as enamels, lacquers, primers, high solids products, and waterborne finishes when properly set up and cleaned.

Q: Is the 98-2650 a kit or a single gun?
A: It is an outfit that includes the Model 2100 siphon spray gun and a separate 1 quart drip proof siphon cup.

Q: What is the included nozzle size used for?
A: The 0.070 inch (1.8 mm) setup is a general purpose size commonly used for thicker coatings like primers and many conventional shop finishes.